Search results

check your battery voltage when its cold and check to make sure you got 12v to the starter. if both are fine then the starter solenoid might be freezing.

god dam. sorry for your lose man.

there's a huge spot behind the wheel well area on both sides in the fenders you can make custom mounts to mount it there.

anything on the kit that dm sells for 100$?

there expensive from toyota and thats the only place to get them. most likely you prolly need to adjust it by taking off the rear wheels and looking threw the hole on the rotor for the adjuster and spinning it till its tight then backing it off 3 clicks.

its best to drive your car at opt temps. i.e. let your car warm up idleing till its fully wam and then drive it. that way all the metal has has expanded you oil is at opt temp and the coolant is warm.

throw the haynes out and get a tsrm or use the link above.

clogged rad or bhg maybe.

could just get them anodized/chromed if you can find the colors you want.

check your codes. i would assume your tps is either out of adjustment or needs to be replaced.

prolly going to need more than a oil pump then.

its prolly the blower resistors. http://www.cygnusx1.net/Supra/TechTips/blower_resistors.aspx check that out.

stock= bypass valve, aftermarket noise makers= blow off valve.

replace the seals, clean the tracks, and do not use any silicone.

so how was it? any pics?

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=1603&P=2 http://www.cygnusx1.net/Supra/Library/EPC/291420/Parts/16284.aspx http://www.cygnusx1.net/Supra/Library/EPC/291420/Parts/16285.aspx i believe those are the 2 hoses you are referring to? ones 7 bux and the others 12 from...

pressure test the cooling system and look hard for leaks. also run a block test to see if there is combustion gas in the cooling system.

theres metal hard lines on the turbo and rubber lines off those.

either brake pulsation or steering rack bushings. i lean towards the bushings. if its pulsation you will feel it when ever your on the brakes light or hard.

first targa seals are rubber not plastic. http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=6104&P=3 save that website it got the repair manual/parts catalog/ and wiring diagrams.