Search results

usually normal to smoke a lil after a nhg repair(head only) but it could also be that your exhaust manifold studs are loose or the threads are ripping out( kinda normal for the 20 yr old alum head) and loosening up.

MikesFixedRoof - sounds like either rings, valve's, or hg. a block test would rule out the rings and valve's. if your stock power a stock hg would be fine just make sure the block surface is straight and machine the head. torque the head to 75lbs with new bolts or arp head bolts to there rec...

the valve cover gasket bolts will loosen up a lot of the time. i used a very very small amount of low strength loc-tite and it stopped them from loosening up.( they loosened up with new toyota bolts). also i used teflon tape for the 14mm hex bolts where the no.3 valve cover gasket is. some...

http://www.suprasport.com/JDM-OEM-Front-Turn-Signal-Lenses_p_228.html

retard drivers..

best job of that ive seen so far but still ugly.

been using it for almost 2 years after i read jdub's links. can definably tell a difference from mobil1 5w&10w30.

if you have to ask this question you have no idea what you are doing. there are plenty of threads with info which you want.

all 89+ are gray and all pre are yellow.

all you need to do is get the connector and re-pin them. which finding out which wores need to go where might take a bit but you wont need to do any soldering. all connectors come apart to where you can remove the wires from the connectors with out cutting the wires.

ive had the brembo's before.

ya i doubt that list is correct.

doesnt the car have to be 20 years old to qualify for it?

its only going to get worse.

yes.

86 is fine.

the rings in it now prolly are not properly seated either if it was running like shit and you weren't driving it.

if you do get it for 100 bux new its not going to be reliable or accurate and who knows how long it will last. might as well save your money or find some good used ones. pillar pods are like 50 bux new for a lotek one.

ya u have to keep the lid down and usually every time you brake usually the lid will fall like sk6471 said.

89+ has cup holders in the center console. there ok ish. i usually either dont buy a drink or buy one that has a cap. if it doesnt have a cap ill usually drink it fast have my pass hold it or put in between my legs, which is hard to shift like that. the coin holder works too just gotta drive...