Search results

It goes to the ecu. http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=48 Why exactly do you want to delete it?

fuel? spark?

It is. You have to drop the tank for the pump.

yikes!!

Usually if you want it precise. That is also part of a valve job. Idk why it wasnt done if the guy got new valve's.

when you do a valve job you have to cut the tops of the valves since material was taken off the head.

IJ did over 8k on his 7m.

lucky. looks like a nice car. black sunroof cars are my favorite.

Why not just rebuild yours? No crate motors for our cars. You can get a new one for like 5k. What is wrong with your head? Cracked? You can do a basic rebuild like rings, bearings, hg, and gasket set for a few hundred bux and then cost of machine shop depending what you do could be 3-500 up...

"The next major change was 1986.5 when the 3rd generation Supra (MA70) was finally given its own identity. No longer part of the Celica line, the 1986.5 Supra was equipped with a 3.0 liter DOHC engine and retained the four-wheel disc brakes and all-independent suspension of its predecessors. In...

http://cylinderheads.com/toyota-pricelist.htm

trans mount, shifter, and drive shaft off and pull.

You will need a 7m bell housing. Might as well build it if your going for any kind of power.

Every time he says something just say something back about how he fucked up on different things and laugh at him a lot. When hes in a bad mood do it over and over till he gets really angry and he might get the point.

might. coolant ruins o2 sensors as well.

You just need a pick to pull them apart and the terminals are the same. Im using a green 87 harness plug on a 89 gray plug harness.

There painted but not paint matched. Either 91 up or all 92's had paint matched. I forgot what year it is.

Its a vsv. Either fuel pressure up or egr.

mine blew smoke for about 20 min after i replaced the hg on my old n/a car.

So your uncle who did the swap would know if he swapped a blown gte or ge for a good running gte. What exactly do you want to know? Take your vin to toyoto and you can get all the specs for YOUR car. Even if it was a ge before and it was swapped in with the matching year harness and car you...