Search results

Thats a 300zx also.

Drove it to work. Might wash it tonight....maybe.

Just make your tune good and cast are fine.

Is this for the front or rear? If you pry up and put pressure on the ball joint it should stop spinning. But if its stripped them maybe not.

^Wiescos are like 300 more. Probes are only 400. I would just get the probes. Also will need afpr and wide band to complete everything. If you get the aem you will also need tuning.

ya you need to fix that so either bad connection or the wiring is shot and you need shielded wire for that.

Leave the nut on barely too so the arm doesnt going flying up.

Sensors are the same connectors are different.

It's uses 6 coils vs 3. So I wouldn't think it would work like that

Thanks jeff. Would there be any way to wire in the 2jz ingniter? Or what about 2 7m igniters. Since there only 2 wire coils it wouldn't be possible to just wire like 1/6 together huh. There was this thread too. Idk tho...

Do not use anything to clean the afm. If its bad replace. 52 is knock sensor 32 is afm signal and hac sensor signal. Either the afm is bad or your wiring is bad or the hac sensor is bad. Check the knock sensor circuit out too.

Check for vac leaks and those cams need to be dialed in.

I have greddy type s. With it as loose as possible i get no stalling at all. Make sure your isc is clean and working properly and it should catch itself.

Wont effect acceleration but is bad for your turbo like already stated.

You need to have to block, crank, and rods inspected and get the right size bearings and measure the pistons to get the right size rings.

Sounds like a boost leak. Also venting to atmo can cause some cars to stall out when coming to stops or letting off to idle.

stock like rings and maybe crap bearings depending on which ones they are. Do you know what size bearings you need or are you just looking for price? I wouold go with acls or clevites.

I think it might be on sf actually now that i think about. The guy made a build thread and about85% of the people just bashed on him.

Nice dude. Glad things worked out.

Not in 3rd or 4th?