Search results

Cheesy beefy burrito?

Or is it beef?

Very impressive. Still seems like way to much work.

How did this happen? Do you have access to a welder?

1.5 bar is 21 psi. Stock spec is 4.3psi at hot idle and at 3000 you should have at least 36psi. Stock gauge wont always tell you what you actually have tho.

Thats cool. At least you shouldnt have some major cracking problem. Seen that happen before.

What about one of these?

Junkyard prices are different than what stuff actually sells for. So if you can go and have one close to you with a 5 speed and/or r154 then you just need to snag it. Out here end of the month is 50% every month. or some are like 6 times a year.

IS misleading children for your advantage wrong?

You could change the bolts one at a time in the torqueing sequence but only with bolts. Not really worth it. Studs the head needs to be off and you must bottom tap the holes. There is about 1/4in or so that needs to be threaded down to the bottom. Each hole has to be clean as well. The...

Dude seriously. You contradicted your self. Camber does wear tires. Toe feathers them. Excessive negative camber wears the inside edge of the tire. Excessive positive camber wears the outside. Excessive toe will scrub the tire at a angle causing the tires not only to get messed up but...

Royal tag team in a bouncing white lifted panel van ultra size with shag carpet and lots of anal lube?

Yup that too. Most people dont even check that.

Always good to get those new and replace them at the same time. You can find a used one in the forsale section for relatively cheap. Might be just as much as shipping. IF it was me id charge 20$ but i dont have one. If you junk yarded all your parts you could do the whole thing for under...

I might have to. Maybe soon too.

Will fruity skittles and lickerish do? What do you think about the rich private school?

Whats the break fluid level like? IS it white smoke or clearish white smoke like when you breath outside when its cold?

Any smoke? Does it idle ok?

Yokes are different.. Just need the front half of a turbo 5 speed ds.

You need to machine the block which means you need to disassemble the block. Whether it blows or not it doesnt matter so long as you dont get a cracked head or block.