Justin: Been there done that didn't get a T Shirt!
I bought a variation of an easy out it's a Tapered Square about 1/2" thick that you bang in with a hammer then turn it with a wrench.
I pulled my motor to do it thinking no way could I get it out and this tool did it easily!
Anytime I've dyno'd I would place my trust in the Dyno's WB as most times it will be a few $1000 worth rather than a dinkydao $39.95 light show...
I know both the Dyno's I use have Motec WB's and replace the Sensor at short regular intervals as they lose accuracy quite quickly.
Having...
Engine damaging issues usually happen instantaneously, if a motor is leaning out "pulling out your driveway" you would feel it and anyone that beats on a lame motor wouldn't be helped by a random gauge....
But I guess it's one of those cases where I have my opinion and will stick to what I...
SS: The way our motors are set up is the pump doesn't run until the ECU sees an RPM signal.
Post a pic of your suspect wiring as these cars have lots of "spares" and they may not be the cause of the problem.
My opinion: Useless for the average owner.
They're a tuning tool and as I stated earlier by the time your brain registers a problem during a hard pull the damage is done.
In day to day use there are so many variables that they don't give consistant readings to get a "feel" for how the...
Do you have access to a compressor?
If yes turn the regulator down to around 10 psi and plug it into the WG hose if the diaphragm is ok the rod will move if not you'll hear a leak and no movement.
Joel: Not really other than it might be a little harder to get it off the line at low RPM.
Dcr: LOL
Justin: The Supra Flywheel is 0 balanced so it can be done off the motor no problems at all.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.