Search results

I'll just cut up another dash cluster to make the female plugs. :D

Hmm... I wonder if I can do the same kind of thing with the opposite. Be nice to have a jumper harness rather than hardwire the damn thing in...

I ran into the same thing with the MAFT Pro once. I just unplugged it, waited 5 seconds, then plugged it back in, and the problem went away.

The loom is different, at least at the gauge end. I'm not sure if you can just purchase the loom, tear out the dash, and replace it. I suspect it needs a different fuel sending unit as well, from the research I've done to convert the other way around - analog to digital. I can check the...

PS: That sealing surface is on the head, not the block. The head is Aluminum, so it will corrode much slower than the block. Brush or spray some type of lube on it and check it every so often.

20m so far...

No, this was with the head off. With the head still on, I use a long piece of pipe that's been dremeled out, and push the spring down with my weight. Then I get a buddy to pull or replace the retainers. Haven't figured out a good way to do it solo with the head still on.

What you're looking for essentially doesn't exist. There are a bunch of different types that are good, but any of them can be defeated rather easily and quickly by a professional with the right tool.

Sure, if you tell them how to turn it on. Which I won't. Hell, the things are so small, chances are they won't even know it's back there.

Yoda pretty much put the irons to that rumor. Despite the higher pressure, the engine put out less power. Eventually he put in a water powered IC to up the power.

Check the coolant switch valve in the engine compartment. Passenger side of the firewall, right next to the windshield wiper motor. Turn your AC on full cold, check switch position. Turn your climate control to full hot, check the switch position again. If they aren't different positions...

I just built my own by using a large C-clamp and taking a dremel to a small section of pipe.

You didn't realize I was lazy and geeky? Not the sharpest tool in the shed, are you?

I'll put one in mine. After you've installed the monitor (for the carPC) it's just a bit of extra wiring and a few $$ in costs, so why not?

No, it's an informed opinion. There is a difference. Ever since Microsoft decided to release games for the XBox only, I've boycotted them. Any company willing to shoot one market in the foot to promote another market (that, coincidentally, provides an inferior product) is far to shortsighted...

Could be. The fellow I got my information from was a guy who put a 7M in his pickup truck. No room for the traditional IC, so he left it out and ran the charge pipe straight into the intake. Engine was stock, pushed the usual 6.5 - 7 psi in the Supra he grabbed it out of, and 11 - 12 psi in...

That's easy to fight, just tell the judge that if you were racing, the ticket would have been for 150mph, not some bullshit 88. What does the cop think you're driving, a Lada? 82 speeding tickets, hmm? How many accidents? I don't give a damn about speeding tickets, the entire 'speed kills'...

Still no pics???

Dude. The X-Bitch blows. Play a real game, use a PC.

Really? Computer stores must suck in your area. :) The folks here have lots of stock. One local place has at least 13 of them in stock.