Search results

  1. I

    intresting bike i must say

    REPOST :p
  2. I

    does anyone make CF doors?

    Ditto I don't get the whole not painting CF parts if the rest of the car is steel....
  3. I

    Prepping for a head gasket replacement.

    I'm not familiar with that particular gasket have you asked the supplier what they recommend?
  4. I

    does anyone make CF doors?

    And roughly 3x what the average Mk3 owner has in the entire car ;)
  5. I

    Supra owner tries to run over girlfriend....

  6. I

    subframe crack

    We'll see in the new year Dave ;) (I have the room/time to produce car parts now so will be looking at various niche products in small runs as I can keep the overheads to a minimum here)
  7. I

    Can Supras Turn?

    It was like sailing a Catamaran ;)
  8. I

    Prepping for a head gasket replacement.

  9. I

    subframe crack

    I used one from a JZa70 donor, guaranteed never to have had Torque through it ;) It also had the bolt in supports under the axles.
  10. I

    7matt's WTF am i doing?! BUILD

    Looks fine if you ignore the Tard Inside ;) Semi common failure, I took steps to prevent it for my 7M.
  11. I

    Prepping for a head gasket replacement.

    Personally I'd just have both surfaced to the correct RA value for the HG you're using, cheap insurance against repeating the job in a few months time.
  12. I

    7MGTE Forged piston comparison

    Always good to get it direct from someone that's actually done it Steven ;) I could "suggest" things all day long but it would only be at best guestimations with no basis in reality! Good luck with the build if you go for it, it's a BIG ask with the 7M platform not unachievable but it's...
  13. I

    How to rebuild my engine 7mge?na 1986.5

    Start here!
  14. I

    7MGTE Forged piston comparison

    May be a couple more but the owners aren't active here so all you're going to get is second hand "he said/she said" and not first hand info, for that power level it would be worth picking up the phone and speaking to Tony in person.
  15. I

    milky crap on cap!!

    Non issue on a correctly built 7M though ;) (there are MANY badly built Jz's popping HG's if you look around the forums, Engines aren't stupid proof no matter how good the design)
  16. I

    300hp 7mge build.

    15k and overnight parts from Japan..... ;)
  17. I

    7MGTE Forged piston comparison

    Contact SupraRich he's about the only person here with actual experience at those power levels.
  18. I

    Can Supras Turn?

    When I first got mine I did ALL the standard stuff i.e: Wheels/tires/shocks/springs/alignment..... TERRIFIED me to drive it hard on high speed bends it had so much roll... It wasn't until I contacted Whiteline and sent them some stock Bars to use as patterns that it became the awesome .95G...
  19. I

    decking the block

    I've built a couple ;) Tq specs depend on fasteners used if stock use the TRSM if ARP use theirs.
  20. I

    Can Supras Turn?

    Good sway bars should be #1 on the list for anyone trying to make an A70 chassis turn.
Top Bottom