Search results

  1. I

    How much have you spent on your MkIII

    100% serious, I used to say when people asked how much was in it "All of it" ;)
  2. I

    How much have you spent on your MkIII

    Had 25k+ just in the electronics ;)
  3. I

    which mhg best for high boost...

    There are many AssClowns working on these engines I wouldn't let touch a Briggs and Stratton... Just because it has a nice parts list doesn't mean it's been done "correctly".
  4. I

    So how many mk3's have you junked/scrapped?

    Ummm not really ;)
  5. I

    Importing from Japan.

    This..
  6. I

    which mhg best for high boost...

    You can "blow" any/all of the available MHG's, none of them are bulletproof if something goes wrong or the installation is subpar. I've ran Cometics and HKS Stoppers at 30psi.
  7. I

    Adjusting the E-Brake (Handbrake) Shoes

    You can pull the shoes apart and it'll drop/wiggle out. (might have to unclip the 1/4 turn pins)
  8. I

    Adjusting the E-Brake (Handbrake) Shoes

    You use a flat screwdriver to turn the starwheel until you can't spin the rotor (use wheel nuts to hold the rotor onto the Hub) then back off the starwheel a couple of clicks.
  9. I

    Finger VS turbo! WARNING: NWS & GORE

    Micro Surgery?? :D <golf clap>(because I can) Steven you're a genius :runaway: Hope it all heals up well, there was one doing the rounds a few years back where the guy lost a bunch of fingers.... (this one is worse as it's one of our own)
  10. I

    need help asap

    Retarded thread is retarded... :nono:
  11. I

    2012 MINI Cooper S Coupé

    It's a bit fugly but if you're happy that's all that matters DB ;)
  12. I

    what member do you think has the nicest MKIII ?

    Performance potential/attention to detail :RonR Appearance/stance :Rodel
  13. I

    A new mini CNC mill and rebuildingy style) and in the process of building my old one.

    I'd like ot see some pics of the Micron tooling beside a conventional milling cutter if possible 3P :) (always been fascinated at how they make/sharpen these teeny critters!)
  14. I

    Port matching?

    Damn I do post a lot of stuff over and over here ;)
  15. I

    For Toyota lovers

    $26000...
  16. I

    For Toyota lovers

    I'll remove all doubt, I'd put an LSx in it ;)
  17. I

    Welding a targa top shut

    I just RTV'd mine on ;)
  18. I

    Port matching?

    It's so it acts as a reversion dam.
  19. I

    For Toyota lovers

    Just a car ;)
  20. I

    Port matching?

    Ok on the intake side you lose power if you match the exhausts.
Top Bottom