Search results

It used to be 57/61/67mm. Now they offer 6262 and the such with the billet cea wheels. Prolly only oil cooled.

Iirc hks did the 3s swap. Maybe not. Could easily loose a lot of weight and creature comforts to loose weight and still have straight six power.

Looks like these are new versions with billet wheels. Prolly similar to the same size from precision but bolts to the stock manifold.

You would want the 6860. Personally if rather have megasquirt proEFI or aem before stinger. Motec is king but it's $$$$.

Aem has prolly the only real true plug and play. Megasquirt pnp maybe too. Megasquirt 3 and ms3 pro are the cheapest tho require some wiring. Can do a whole new harness or make a patch harness

You could always run another inline.

If you use stock arms need to strengthen the tab. The heim joints do wear out faster but iirc beech might be able to get some greased spherical ends as well. And the just heim joint can be replaced if needed too.

The plastic links will break with stiff sway bars and the tabs on the lower control arm will break as well. Beech performance sells upgraded arms. As well as battle version.

75 is fine with stock bolts. Arp with the new lube should only be 90.

Get the non abs lines.

No mirrors?

http://www.supramania.com/forums/forumdisplay.php?58-MKIII-Parts-Wanted-(1986.5-1992) Make a thread in that section. Could try pm'ing Toyota88. I believe he usually finds set of those lights. The forum is not hard to navigate through. Spend some time and get used to it. There is a lot of...

http://www.supramania.com/forums/showthread.php?53058-Update-7-12-09-White-car-stripped-for-paint/page9 Look at shaeffs subframe. Shows where his was welded.

sounds like a wastegate problem. Have you checked for codes?

Photobucket.com Use the [img] code

Are the wastegates hooked up?

There euro corner lights. Factory. You can get the 89+ new still but the pre 89 are out of production. If you post in the wtb section you could prolly get some easily.

Nope. The sensors are not slow. It's the gauges an the way there set up.

Ya or eBay or junkyard if you can find them.

Are you going to make a patch harness? Might be better to just make a whole new harness with. 12' one from diy. Then run seq fuel and ign using 1zz smart coils.