Search results

Good to know I did not know they made high temp stuff

Good to hear Im gonna go check my reseviors for screens now!

You por 15 the exhaust pipes? o

Ok............ every 7M rez Ive seen does not have a screen its a simple rez. turn the wheel several times

sounds like the power steering is low

I have both units aeromotive/china copy look under my user name for a comparison thread very similar units I ordered an Aeromotive rebuild diapragm for peace of mind for the ebay unit I am running both units one on each of my Supras 450 and 350 HP been running the china copy for 1000kms no...

I had this one haunt me way back is your main grounds grounded the ones on the drivers side under the intake manifold?check you fuses? since theres no power

I just went through this same issue First I checked the connectors at the coil pack and made sure I had 12v just disconnect them and test with a test light 5 min,that ruled out the coils not getting 12v next in line was the CPS the wires on mine were pulled apart inside the harness beside the...

Ive had two sets 680s and 550s I got both sets from importblowout on ebay I had both flow tested and ran both feeding a gt35r both sets flow tested perfect, for peace of mind I would get any injectors flow tested that do not come with a flow sheet.

I got mine from Reg Reimer http://www.monsterhorsepower.com/

Do you have a fuel pressure guage? does it drop as well? I does not state it anywhere just trying rule the simple things out.

Are you using the proper mounts on the 7M 89 and previous have different mounts than 90+

Stick with 550s I made the mistake you are contemplating ended up getting 550s

It looks to be the same as my gt35r but the comp housing is off mines a .70 and I personally would not buy it just because of the damaged fins turbos spin and 100k rpm any small imperfection in the fins will send this turbo to an early grave save the cash and buy a new one they are not that...

Are you refering to a engine under cover or an actual front splitter they are different items a front splitter extends past the front lip the under cover does what it sounds like covers under the engine and keeps tubulant air under the car the factory one works great at higher speeds I have...

You will have to solder the new wires on easy to do just take your time and MARK all the wires before cutting.

Venoms use the factory clips, Venoms are just bored out factory injectors Ive had great results from PTE injectors same plug as RCs you can get em of ebay for around 350$ Ive had two sets 680s and 550s,I flow tested both and the results on both were great. Ive also used RCs which are also great...

If you can see it what does it smell like if its fuel you would really be able to smell it. And it would run very rough if an injector is dumping fuel into the cylinder, How does it run? My brother had a Venom fail and it dumped so much fuel it contaminated the oil.

oil burns blue coolant burns white fuel burns black

White smoke is coolant black is fuel get rid of those venoms they are junk I cant believe people are still using them