Search results

We (brother and I) put 6.5's in my doors. Had to make our own brackets, and cut some insulation...wasn't that much of a pain...just that the speakers sit a little deep. We used Polk components.

Thanks for the suggestions. Makes sense.

Sorry wasn't clear. Normal load is 15-16 af, WOT is 11.5. Thanks for clearing up the dropping to 10 as normal. Makes me feel a little better.

Hey everyone. Right now as my build sits, under WOT the car, according to my aem wideband and a/f gauge, starts at about 11.5 and then slowly drops down to 10 (minimum reading level on gauge) as it approaches 16psi. Is this normal for not having a tuning device? I've leaned out the fpr a little...

Saw a toyota racing specialist today. He drove it and as soon as 2nd gear hit under WOT, he said, "it's definitely the 2nd gear clutch pack starting to slip." He said it's drivable a long time as long as 2nd gear isn't abused. He recommended getting the tranny built within a year with...

Hello. I'm running 15psi on lex afm, 550 setup with supporting mods. My auto tranny has an external cooler with fan and shimmed 1/2, 2/3 accumulators. As the car shifts from first into second, I can feel a few (3 or 4) distinct vibrations or shutters as 2nd gear starts pulling and then they...

haha, woops...sorry about the that shi*t Thanks for the advice on the torque converter. That's the second time that's been mentioned to me. Any other ideas are welcome. The metallic/oil smell is after any moderate to heavy throttle is released from the motor (let off the gas). I am not loosing...

This originally was posted in the General Discussion Forum, but it has basically been bumped onto the 2nd page with no reply, so I figured I might have posted it in the wrong section. Here we go: Hey everyone. I had two issues show up almost at the same time, so they might be related...

Hey everyone. I had two issues show up almost at the same time, so they might be related. I have an auto tranny, mk3, 550's, lex, walbro, fpr, 50 trim, running 16 psi with supporting mods. Auto tranny shims 1/2, 2/3 accumulaters, 12x12 tranny oil cooler with fan Issue 1: From first into 2nd...

Sounds like fun. I raced a harley sportster...it was all modified with my new camry SE and destroyed it. I couldn't believe I could pull on a bike with a family sedan. Some bikes are all looks...which is fine since they are really made to ride and not race. mustang no surprise...unless its an...

So I'm cruising along the lake on the way to work on a relatively remote, nicely maintained highway enjoying the scenery, and from just a spec in my rear-view comes flying up this late model, perhaps new GTI. I'm going about 55, so this guy was definitely pushing it to catch me. I let him pass...

/agree Had to turn the laptop sideways... haha

Yup, and this is why we need one of the experts to write a Lex AFM, 550's, AFPR, pump mod sticky! PRetty Please!

I'm in the process of doing this upgrade. Here is what you're looking at: 550cc Injectos ~350-400 Lex AFM ~75-100 (used) AFPR ~120 Wideband ~175 Fuel Pump ~50-75 Prices will vary depending on what brands you get, and who you're supplier is....

Well hopefully the dude I bought it off from was honest (ebay seller) when he said it was included along wiht everything else it comes with stock... Thanks guys!

Does the Lex AFM have a honeycomb screen like the MK3? I'm going to buy one and I wanted to make sure I get everything I need with it. Thanks in advance.

Thanks for even further clarification...much appreciated. ---------- Post added at 06:22 PM ---------- Previous post was at 06:22 PM ---------- I live in the lakes region...close enough to north/northeast mass to come pick up the AFM if you want to sell it. PM me with details. Thanks.

Great, thanks!

Is there a writeup somewhere about using those pieces (afm screw, wideband, afpr) to tune? I did some searches and didn't find much after 10 pages of results... Especially the lex afm screw...I know you have to drill out the one on the 7m afm...does the lex afm need to be drilled/tapped as well...

Hi everyone. I apologize for a redundant question, but, when searching for Lex AFM i receive about 100 hits on AFM's for sale, and not a lot of info on the mod itself. My first question is, when I install the Lex AFM, 550 injectors, fuel pump, o2 wideband, Fuel Pressure regulator, will the...