Search results

66mm turbo still shouldn't fall on it's face @ 6800rpms on a 2.5L though...? Have you played with timing at all? I vote for increasing IC piping to 3".

I'm in the process of building/swapping in a 1JZ and will be running MS with Sequential Ignition. Hopefully it all works out. If you need any info on it, let me know as I've accumulated a fair bit (in regards to running the 1JZ off of MS).

I've contacted the company who I bought it from in the first place, but they were no help. Then I contacted ACT and they've requested pictures of the disc...who knows, maybe it has something to do with that bad run?

Hmmm, weird why they list both the 6240607 and 6240608 for the 7MGTE. Thanks for the input! EDIT: Apparently the clutch discs are the same between the R154 and the W58! What gives...?

I had ordered & received a replacement clutch disc for my 87T a couple years ago...long story short, the 7M blew up, I pulled/parted it and the car has sat ever since, waiting for the 1JZ to go in. Today, I was putting together all the drivetrain bits in order to bolt the tranny back onto the...

Evan, you must acquire twin Walbro's in-tank... ;)

Does it have oil and coolant ports?

No diffusion material b/c the installation of the LEDs doesn't really allow for it. LEDs under 500mcd are quite dim, aren't they? I still would like to see them during the daytime. EDIT: I just found some "LED Lenses" from Digikey that should do the trick! They come in 6 colors including...

Anyone??

160A peak output is fantastic, but what is the output @ idle compared to the OEM one?

Would a 1200mcd 120* viewing angle LED be easily seen in daylight and not blind me at night?

Checking the 1JZ/2JZ section would be easiest...

I will be cutting a panel out of ABS material in order to mount aftermarket gauges (none of the OEM gauges will be used). Therefore, I need to mount LEDs on the panel for signal lights, high beam, etc. The OEM clear plastic "cover" will not be used, either.

Yes, you will see the leds directly, there will be no diffusion material. If that's the case, I guess I should order up a PWM dimmer as well.

I should've specified that there will be no leds behind the cluster. My indicator lights will be visible (naked, if you will), that's why I want to make sure they won't be too bright @ night.

I'm in the midst of building a custom instrument panel and changing out the LEDs in the climate control. I plan on using 5mm indicator lights in the cluster (signals - green, hi-beam - blue, tems - green, hi/low boost - red, launch control - red, 2-step - red, trac control - red, etc.) and have...

When I pulled the flywheel off of my 1JZ, it didn't have any spacers behind or in front of it.

There ain't no starter/fuel pump kill in the world that's going to stop someone from picking the car up with a tow-truck and hauling it away...

Stunning widebody, tekdeus! Hope to do the same to mine one day. :)

Just the answer I was looking for. :) Thanks tissimo.