Search results

Nice run Sean! Now just get that missing piece of your front fender back on. That drives me nuts.

1.85 to 1.89 most places in Ohio. Too bad diesel has not gone down as much.

The turbo and knock sensors alone, if in good condition, will more than pay for the whole motor.

I gained 40 rwhp changing from stock piping to 2.5 inch hard pipes only @ 18psi with the stock intercooler. 300 rwhp to 340 rwhp.

To the OP, if you buy all your items from one vendor, you should be able to request a lower price break from any one company. If you spread your purchases around, you will end up paying more than if you had one good price with one shipping fee from one good company. Besides that, you should...

Thanks for the plug John! I almost did not want to mail that head back to you.:biglaugh:

Jdub - Post a pic of the gasket surface of your head. Show everyone what a CBN cutter finish looks like.

Surface Grinder or CBN. Just make sure the operator of the CBN does not mistake RA 50 for 50 cuts per inch.

Meaning 4-5 weeks until they are avaliable. I like that PM that was sent to you. Here is my answer to that PM 1) If the phasing is off some on the ex. cam, all you need to do is adjust the CPS one tooth advanced or retard to make up for it. Then you will still be able to swing the CPS...

Yes, Not during spool while brake boosting, but as soon as I lift the brake. That was with a stock ct and stock intercooler.

I agree with that. Ebay does not make radiators. Junk radiators can be purchased in many places besides ebay. Every name brand radiator can be purchased on ebay too. I never understand the "ebay" crap statements. That radiator would not fit no matter where you purchased it. If purchased from...

My a340 is a SIP built auto with a SIP 3000 stall converter with a SIP valve body. I have over 200 1/4 mile passes with 360 rwhp on it. About 30 of those passes was with a 70 hp shot of nitrous added which would put it at about 410-420 rwhp. No problems as of yet.

Kai - Last week I spoke with BC and the stage 2 cams are 4-5 weeks out. The stage 3 cams are still around most places. Maybe someone out there still hase a set of BC stage 2 cams on the shelf. If not, there are many other manufacturers of cams for the 7m.

You would want a shorter lift longer duration cam for a low end power band. I still do not know the full specs on your Ruben cams. The only true measure of a cam is at .050 lift. Advertised specs are not 100% worthless but close. If you cannot find the specs for the cams, your only recourse is...

The ruben cams, are the specs at .050 lift? What turbo are you running? Because just saying 15 psi does not really mean much. Where in the power band do you want the power to be? Both cams would be best for a certain application, but what results are you looking for? Street driving with good mid...

Wooww, that is really expensive for a pump. Canada must be a bunch more than here in the US, they are usually only 250 to 270.00

I think I can send the tank for 15 bucks each way. So if you still want to weld in the sump, I will send the tank to you along with the sump once I get to that point. You could pm me your address. Thanks Bud!!

I would go as far to say 11's. An auto with the right stall speed at your HP level should be 11.5 to 11.7. I went 11.95 with 50 less hp.

Drag Results?? Why is it so hard to find Drag results??

Hey Anthony!!! Will the Track allow overnight stay's for out of town folks?