Search results

OP aseked what would be the best gasket for the basic rebuild NA, and I would say a felpro or oem gasket myself. metal gasket is a waste of time and money on a NA.

Thank you! I will, because I cannot even fit a floor jack under this thing with the cut springs it came with.

Here is some info from Bondango John. The first parg. is from his 7m. He had a 4088 on a mk4, then switched to a 4088R and it spooled 6-700 sooner.

Hey John, I think Anthony (quickstrike) ran that turbo prior to his gt4067R, and maybe Martin (Bondango) in the UK has run that turbo as well. Send Anthony pm, and I will shoot Marty an e-mail for you.

Someday Gary! When we both have more money than we know what to do with! Always a big fan! Darn tootin it would be. I hope to see some real low 4 second 1/8 mile passes.

If anyone near Ohio wants to go to the ADRL event at Norwalk near Cleveland, Ohio to watch Titan race against all the 800 cu. in. motors; then call me at 330-618-4844. I have about a hundred extra tickets and would like to see a good turn out to cheer for the only import running that weekend of...

I got laid the first time when I was 15. I don't have a video of it, but trust me, it happened. Might have lasted longer than Duane's 1/4 mile pass.

It should! Going back into the same color car too! Needed to ask you a ?? on that tranny, call me at 330-618-4844 sometime when you have the chance.

Look what the freight truck came with today! Still gathering parts. Still need some stock springs if anyone has them.

You will be fine on stage 3 BC cams with near stock redline. You still have room left even if it compresses to 90%. You won't coil bind.

Unishippers - 888-864-7470 , it is frieght, but they broker many different types of shipping companies. Mention Supra Forums for the discount.

The bearings in this "kit" are not matched to anything. A crank is not included in this package. You would have to tell Suprastore what size bearings you needed. theis means your crank would already have been inspected by your machine shop to see what size the crank will be ground to. This...

Maybe your exhaust system is full of coolent from the previous leak?

The 7m bolts are slightly longer than the 3s bolts. If I recall, the 3sgte bolts are one or 2 mm bigger in diameter than the 7m. So the 3sgte bolt should not even fit into the 7m crank.

If you pull the motor, you don't need to pull the head or pistons to remove the crank. The way I fix them is to install a false key made of carbon into the slot. Then build up around it with weld. Then I knock the carbon out of the slot leaving behind a nice keyway. Then the crank has to be...

MY car?? The only update on my car is it has an extra 13 thou of dust on it than it did last time I worked on it.

We demand vids buddy! Pics or BAN! or unveil in Vegas..

The reason I asked was; if the head is that warped, and then it is milled flat on the gasket surface, it will still be warped on the top accross the cam journals. Now when you go to install your straight cams into a bent housing, the cams will have terrible "run-out". To fix it you need a new...

20 thou is a good bit, was the head warped?

New motor is not built yet.