Search results

Just wanted to post some pics of these 7mge high compression pistons I had made. The ones in the picture are 11:1 compression. Enjoy!

Lots of things I do are not on my website. I sell nearly 600 different companies parts, but I don't have them all listed. It is just impossible. What the guys are saying is,,if you want your set of na cams reground, you can send them to me and I can re-grind them to a .310 lift, 274 duration...

The na cam in a na motor is set on a lobe center to create some overlap that causes the exiting exhaust to begin to pull the next intake charge in. You will defeat the proper NA cam profile by swapping in a turbo cam. Try a set of cam gears to defeat the built in emissions profile of your na...

Don't realize that Toyota put more 1G motors in mk3 supras than they did 1jz. And more 7m's than both of those put together.

Shimless would not hurt anything Fred. I did make those cams of yours to work with the factory shim over bucket, but it never hurts to have a shimless set up. Give me a call. My number is 330-541-1122

I will have a dyno sheet in the begining of the new year after I complete the motor they will go in.

All that I mentioned are above 700 and at least half are in the 800's and several are 900+, maybe 5 or so are around 1000. So was your price tag!:naughty: WOW out of the wood work comes Bryan. I though I would see you sooner with the words "billet cams" being thrown around! Only took Duane...

There are lots of high HP 7m motors all over the world. Most of them are just not on any forum. I know of 3-4 in Puerto Rico, 2 or 3 in South America, 5 or 6 in the UK, a good handfull in Germany, 1 in Russia, 2 in the Ukraine, Latvia, 1 in France, 2 in Malta, 2 or 3 in Poland, Greece, 2 or 3 in...

Yes, that fall off was prob. caused more by the turbo running out of breath at that point.

Actually it helps you shim a reground cam. The longer 2jz valves will make up some of the base circle reduction on the re-ground cams. It will reduce the seat pressure on the spring however, but not very much.

No concern at all.

Nothing wrong with BC +1mm valves. There is always manley and supertech as well.

I will catch you on the next motor! The TRD cams are pretty nice however. Besides custom billets, I believe they were the largest cam ever produced for the 7m. Duane - you refering to the buckets? The 28 mm come from the Toyota Echo and the bigger 32mm ones come from the Pontiac Vibe...

Yes, you can. Many stock seats will not cut that large and you will have to machine new ones from blanks and you will also have to adjust the lenght of the valve. It has been done before.

There are a good hadfull of motors right here on SM that could use a set of cams like these. Many more over seas also that are not even on a forum. It is surpizing how many high end 7m motors there actually are in the world. There are some dyno sheets of big cammed 7m motors floating...

The going rate for installing oversize valves, new seats, seals, springs and retainers is 350 to 400.00 Port jobs are usually done on a time and material basis, you can spend anywhere from 250 to 1200.00 just on the porting alone. About 500 would get you a really nice high end street/strip...

These cams are way bigger than BC cams. These cams are for the highest end street and race 7m motors. If you are talking about the BC stage 3 cams, I do not have any idea where they begin to start falling off. With These billet cams, you would run out of RPM before you ran out of cam. The...

It is common to nearly any pressure plate that uses the straps. It is NOT just a Spec thing. Things break when you up the HP, it is just the nature of going faster.

I can always put together a kit for you. Just need to know the sizes you need. I sell the 28mm shimless buckets. In the big picture of building a high end motor, 350 to 400 on a shimless bucket kit is really not too much.

Lets say that these require a bucket upgrade. Shimless and shim under bucket both have a solid top. The usable area on both is 28mm ( that is if you are still using the stock lifter bore diameter type bucket). The size of the lobe on these cams needs a minimum of a 28mm bucket. So, whether you...