Search results

What tires are those?

TX2K in March... Not really a Supra meet anymore though...

Its next on my list haha

Is there any rule of thumb (x number of turns out from full in for each additional PSI) or anything other than trial and error to get the screw dialed in? I backed mine out 7 turns from full in, and only hit 11psi when getting tuned...about 80F ambient... I was hoping for closer to 15, but...

Yea I agree, I guess my point was if inlet airflow is the limiting factor...i should have been more specific.

Open that Lex screw way out... I went to the dyno expecting 15psi and maxed at 11... Or get a boost controller

The NEO allows you to correct the fuel (by percent) at different rpm points...it linearly interpolates between points. You do this for a high and a low throttle map. You set the throttle switch points. So to answer your question, no. You can't adjust the decel map with the NEO...but I...

Uhhh I don't think its normal for oil to be spitting out of anywhere....

Current 1J leaderboard...Not sure when it was last updated. I know Albert is now at 755whp... 1.Albert - 722whp/618wtq - 30psi on stock block 1jz. 1200cc, e85, dual 044, T70 turbo. .84ar, 3"dp, 4" exhaust, 272 cams. 20° timing. Tuned by tony at UMS on Proefi 128 2.525gte - 641whp/500wtq -...

Albert made 755whp...stock block 1J

Didnt quite make the list...yet 320whp/330ftlbs @ 11psi 7MGTE, stock internals, stock ct26, non-shimmed WG BIC DDP, Test Pipe, 3in Catback, Vibrant Performance Muffler 550s, LEX AFM, NEO, Walbro 255, AFPR 2.5in IC piping, Spearco Replica IC, HKS SSQV III BOV 2J coils

You can get replacement front uppers from Dorman...they are pretty damn light already

This! Also, there is a three step procedure when calibrating the TPS First, set the throttle stop screw to get the correct throttle plate gap Second, set the dashpot third, cal the TPS.

dude...read the oil section

How many miles on the motor? head retorqued? Gonna be hard to get to 10-12psi with stock intake and exhaust...

0W30 german castrol... Hace you read through the oil and lube section? http://www.supramania.com/forums/forumdisplay.php?108-Motor-Oil-Lubricants-amp-Filtration

I also have Tokico Illumina IIs, paired with Eibach springs...and I do not have the buick-like underdamped response. When you installed the struts, did you make any adjustments to the struts "selection" tab? The Illumina IIs have 5 different stiffness settings, and they are NOT shipped in...

<300 Mine was cracked and I am only basic BPU...and its an AZ car...so no rust

yep, had mine powdercoated