Search results

He was trapping about 120 all day just couldn't get it to hook at all... he would've beat me if he had a descent launch! Dok33 is awesome every year he helps me out one way or another! One of the best guys I know!

I ran 12.3 @ 115. in the finals with josh dok33

First round got me a bye run... bout to make a pass Missed you guys! George and Jay! Turnout was good but not for drags:(

Ran 12.2 @ 114.. 12.4 12.7 Best of all ran a MVPGTR and beat it all the way.. 12.4 to 12.7 my 1.95 to his 2.1... hope someone got that on video....

Ok, Swapped out the cam caps.. swapped cam gears... checked everything.... Now I think I have piston slap or something... It doesn't sound like rod knock... But something.. I made the 250mile drive to Houston and beat the shit out of it and it still is the same... but don't think that I'll be...

I would love to take it apart and back to them but its my only car...I'm changing out the cam caps they sll look good so far... also checking the valve clearences aswell.. got a spare cam gear going to install that too.. hopefully I can get this thing fixed by tomorrow!

Like Grim just said the shop swapped the caps so the intake cam has the looser caps on it... wheather or not that's causing the wobble I don't know.. but I'm going to pull the caps off tonight to see what I find.. gues its my fault for not noticing it when I got it back.. I made sure the numbers...

I have ran this head for a while now its been off a couple of times... but never had this wobble.. I was thinking that maybe when it was at the shop something happened to the cam and it got slightly bent? I'm going to throw another cam in there tonight and see if that helps... what's weird is I...

The cam gear wbbles but doesn't touch the plate or bolts that hold it in place.. I think that its something to with the cam since the cam gear is tight and doesn't hit anything.. I'm going to pull the cam covers off and have a look... I did just replace my head gasket and took it to a machine...

Ok I went to the strip onfriday night... sat I started to hear a small tapping sound... I is coming from the intake cam... I just had the head decked and they have to take out the cams to do so.. I'm about to take off the valve cover and take a look... trying to get to TX2K10 on Friday... what...

bought a new stethescope today.. going to look all around and see if i can find it.. Hopefully i can and it's just something small.. I really wanna go to TX2K10!! I drove the car today about 20 miles and it pulls fine and drives fine... just has this tapping noise...you can't event hear it...

My 60' was only a 1.95... it should be a low 12 or high 11with a better 60'... depending on how much I pick up in the big end... I've heard a ticking sound like my injectors and such but this is a light tapping sound... going to check all pullies in the morning.. and take off my valve covers and...

Well had fun at the strip last night.. ran 7.99 @ 92.5 mph... only got 5 runs in... today I noticed that it was making a tapping sound about 2k rpm and higher.. but its slight.. not very loud.. I've had rod knock before twice and this doesn't sound like that... the car still pulls really hard...

I've driven about 100 miles and now its fine.. turned the heater on several times.. keep checking for coolant loss and there is none.. floor isn't wet... just weird.. I think it was the night before when I took off the front timing cover and didn't fill it back up with water and the turbo line...

I hope you guys can make it down! I'll be there I know a couple others will too... I hope we have a good turn out in tx

Yes your car is going to vibrate like mine.. I've replaced a lot on my car and still got vibrations bad! Just get the 98 Supra mounts they are only $58 a piece from champion or elmurst toyota.. vendors on sf... you will be very happy you did! I'll have about 500rwhp next weekend and they will...

We have a lot of the same mods JE .20 over pistons HKS 1.2 w/arps Head freshly rebuilt and decked 5 angle valve job Custom hardpipes.. Big FMIC Tial Q bov Areomotive AFPR with stainless lines South Bend stage 5 clutch 8puck 3" turbo back exhaust custom with Basani muffler 60-1 Bolt...

That park is Patrolled by cops all the time! Be careful! I live only 1/4 mile from there.. Poodles whats wrong with your car? Why can't you bring it? I might go next sat... can't this.. Hotel party!!!

Show and shine and dyno is on friday the 19th... I'll get there about 2-3 just enough time to get on the dyno.. I'll be there through sunday so I can do the drags! Can't forget about the night meet on sat night.. probably the best part of the whole thing!

Ok so I just did a new mhg and rad and turbo and lots of others... today I was driving my car all around and noticed that my temp started going up then down.. then all of a sudden it was going up some more and you could see steam on the plexi in front of the gauges.. like when you take a shower...