Search results

Just as it states, What its the bolt size to bolt the engine bock to the engine stand ?? I tried the search button and couldnt find it ...Thanks Oscar LMK

Ill answer your question. For stock power to about 375 rwhp/rwtq you will be fine. Those rings are chrome moly, so you ll be fine. I have used that set of piston and ring combo TWICE, but the piston seems to brake the lip inbetween the rings on both rebuilds. Some people have had really good...

If you just want one boost setting go ahead and buy the safc1. Tune your car to the best of your ability.Good luck:aigo:

The safc2 has 2 maps for 2 set ups. I had my first one tuned for low boost and then when i wanted to run high boost i scrolled down on the safc2 and switched to file 2. When i went to the dyno i tuned low boost = FILE 1 and high boost = FILE 2. I think thats what the guys ment by 2 maps :aigo:

Hey man i run the 87 rx7 turbo II 550s on my supra, along with a walbro , ct26/60-1, afpr , Safc2 , stock intercooler with 2.5 pipes and a 3in turbo back no cats. I have so far made 355rwhp and 377 rwtq at 12 psi and at 15 psi i made made 377 rwhp and over 400rwtq on STOCK INJECTORS at 33psi...

If you going with a tubular manifold, my sugestion is a t4 set up. - Ebay manifold $200, - Master Power turbo of your liking from t61,t63,t63,t66,T67,OR T70From MODULAR TURBO about 600-650 shipped talk to him. -Oil line kit $150 - wategate from ebay $150 or real on for $300-400 dllrs...

Looks to me that you got most of the supporting mods to run around 450 rwhp. Do you have a stock rebuilt engine? Have you dyno'd the car and if so what are your numbers? On that ct26/60-1 is it just upgradded or is it that $700 dollar full bolt cartridge from ebay?

Ok thank you sir for the quick reply.

IJ --- What year and model cars do those fan come out of sir?

Im running an ebay xtd 12lb chrome-moly STEEL flywheel and its been good. :evil2:

I had a spec 3 and it held over 400 lb/tq for a couple of years of abuse. Now that im down for a forged rebuild, im gonna try this peace of art; http://www.suprasport.com/South-Bend-DXD-F-Track-Series-Clutch-Kit_p_477.html By the way, clutches are rated by how much torque they can hanle...

Check your cps with an ohm meter and make sure its with in specs. Check Your connection on the harness and cps side and make sure its good. The cps connector on the harness and cps have a tendency to go bad and you get the "Jiggle the wire syndrome". Good luck

HI whats up man i see you live in Conroe, im now living in houston man. The reason im asking is because there is a person in conroe that is sellin her he351cw with stock lines for 300dllrs. I was looking at ebay for one of those ct26/t3 adapters to go along with a 38mm wastegate. Can the...

Hi what vehicle does the hx40 and hx35 come out of ? Im starting a holset setup and its between those 2 and the he351.

Good numbers man can you post a list of mods. This gives other people a good idea about how much horsepower can the upgraded ct26's make before the ask. Thanks and again Great numbers..:beer:

Hello everybody i got a couple of questions that i couldnt find in the beautiful SEARCH button. I got low compression on cylinders 3&4 after a FULL rebuild of the engine im June 08. My mechanic that has an 11 sec 7mgte tells me that its just my rings. Now in search of future power later on ...

Put me on the list : stock 7mgte, r154, ct26/60-1,K&n,lex afm,440's, ddp,3"exh, walbro,2.5 hardpipes to stock intercooler,evc4 set at 1 bar and 11psi 2nd run,safc2 1ST RUN IS THE ONE :evil2: 1st run was at 15psi and made 377rwhp and over 400+ rwtq (light blue) 2nd run was at 11psi made...

Man those numbers are low for 15 psi and that turbonetics ct26-60-1. I dynoed 377rwhp and over 400 rwtq on stock 440s and stock front mount at 15 psi on an upgradded ct26-60-1. I was running lean though and had to turn it down to 12 psi and made 355rwhp and 377 rwtq. What was your a/f ratio fot...

Hey man check out the "Classifieds " in the main page. There is a bolt on greddy 20g for sale with everyting in the kit for 900dllrs that will get you to around 450rwhp with supportin mods . Just my 2 cents good luck man ...

I feel your pain man, I just did a compression test and my #3and 4 are 65psi and 60 psi. Fresh rebuilt last may, i dont know what caused it though. Leakdown test you say hhhmmmm. What are the things that i can check on those 2 cylinders that could have gone wrong? Rings? Valve Stems?Headgasket...