Search results

Guys i have a problem at all times with the car stayin on . It just wont idle correctly , heres the deal. Can somebody TELL me what the computer or what ever other component doess when you DISCONNECT THE AFM. Because when i disconnect the AFM it purrs and idles like it should. Does timing...

You can add me up to the hp list 380 rwhp and about the same torque numbers DARK BLUE IS AT 12 PSI 344RWHP LIGHT BLUE IS AT 15 PSI 380RWHP CT26/60-1 , 2.5 IP, , WALBRO,AFPR, STOCK 440S AND STOCK INTERCOOLER,SPEC 3, K/N INTAKE

Also check the heater hose that goes along the wall into the head, the 90 deg hose and a cap thats back there. But my bet is on the 90 deg hose or the cap since they are closer to the exhaust. Good luck and let us know what the deal is .....

Hey REDMARO when you installed your walbro did you secure it with a clamp to the pump holder? I just changed mine cause i had low fuel pressure , it would dropp when i tap the throttle . Came out to be that when i secured my last walbro to the pump holder with the clamp it broke then nipple of...

Hey you know if ups delivers on saturday ? There is a shop on florida that has one with ups next day air ...

Anybody here in Texas know of a shop around houston that has the walbro 255 lph/hp fuel pump in stock . I need it by saturday HELP!!! You can post ill be on or give me a call at 956-432-1827

Hey guys i been looking in the search button for the last 20 minutes and i can t find the answer. Now the problem is that my tail lights wont turn on when i turn my headlights on. I have the taillights light on the dash ON. The signals work, brake light ON the wing work but not the ones on the...

I got a problem with my idling when at a stop or light, it just wont idle right . I have walbro and aeromotive fpr 550s, lex afm and the guage on the fpr is jumping from 30-35 psi back and forth with the vac line off of it. When i hit the throttle from the engine bay with the vac on it ll got to...

Hey im running the turbo II rx7 injectors on my supra and you can get the injectors from autozone for about $6 a piece or junkyard special. Have you rebuilt/flowtested the injectors??? I highly recomend this, i had mine done i got 2 extras if you need them all 8 flowed 550cc after ..

I know damn wires im gonna see if i can find another CPS cause mine is leaking oil inside of it. Im gotta find an electronic boost controller and im all set for the dyno. I hope to get into the 430rwhp/rwtq area. Before my 550 inectors and front mount intercooler i dynoed 377rwhp at 1 bar but...

ITS ALIVE!!!!!!!!!!!!!!!!!!!! As of yesterday night my supra lives again.:icon_bigg The damn connector for the coilpack on the ecu harness was broken off and the CPS wires need to be rewired. After a few Coronas it was all taken care off now i have to rewire both connectors correctly. Thanks for...

ok guys im gonna pop the valve covers tomorrow afterwork to see if something looks suspicious in there. ill keep you guys posted thanks for the input you all...

Thanks 1J for merging the threads, guys has any of you had the problems when hittin red line. The head just had the valves seated, cleaned , decked for mhg and new valvestems.

Well to check for spark i just disconected one wire at a time and made sure it was firing, but made no difference. The car runs but you could hear the miss through out the rpms. The smoked out plugs had no oil on em, i replaced every part on my engine and took my time putting it together. All...

Hey guys while i was test driving the car, I hit the red line 3-4 times and it started missing right after it. Now i have done this; 1. changed to new spark plugs and i have brand new ngk wires 2. did compression test and all are at 172 (did a full engine rebuild 2 months ago) 3. set timing...

You should start with an Aeromotive afpr and drill out the whole in the fuel hard line under the alternator. Maybe your stock fpr is going out, i would start there. You got any codes ?

Nice with those mods you are just there to pull on them. I murdered an srt8 charger 3 times in a row. He wouldnt give up all it took was 15 psi on my ct26-60-1 and it wasnt car lengths it was bus lengths. Good kill we should get together sometime and race. Therre is plenty of racing ,im here in...

Ohh i see i have a friend here that has about 5 wastegates here in Houston, ill borrow some to try em out and see if its my wastegate thanks . Hey i just saw you were from Houston were do you live???

Guys some fag recently broke into my car, broke my window and stole my HKS evc 4. Im running on stock wastegate and when i hit the gas my guage will read 8psi then in higher rpms it will creep up to 17psi . What can cause this boost creep? Any help would be appreciated...

Sorry to butt into your post Cajun. How is that JVT radiator working for you? How was the fitment ? Im tryin to get me an aluminum radiator cause it hits almost 100 deg here in texas.I see they have good prices...any feedback would be great thanks