Search results

  1. 86_sports_1jz

    Arkansas Members

    i'm out near siloam springs, why whats up?
  2. 86_sports_1jz

    1JZ Vacuum Routing

    you can buy any kinda of vaccum cap at your local parts store
  3. 86_sports_1jz

    1jz flywheel torque spec?

    it should be the same as the 2jz torque specs. if you search it, it should come up. might even be the same as the 7m, don't forget to use thread lock or lock tight
  4. 86_sports_1jz

    Power Steering lines help

    i think driftmotion has the lines you need
  5. 86_sports_1jz

    Oklahoma Thread

    come on guys, lets all go! it would be nice to meet some of you guys in person
  6. 86_sports_1jz

    Cracking the R154 from the 1J

    o... yea i forgot i had to tilt my motor back alittle also...
  7. 86_sports_1jz

    Cracking the R154 from the 1J

    i usually do it from up top with a wrench, there should be some room from the side
  8. 86_sports_1jz

    Mini Supra Meet Saturday April 11th, Tulsa Ok

    cool, that sounds good but it depends how far away it is. where is the meet usually held at?
  9. 86_sports_1jz

    Fuel Dampener Bypass

    so has anyone had any problems with it since they removed theirs? i just removed mine but have not drove my car or anything at all yet
  10. 86_sports_1jz

    Mini Supra Meet Saturday April 11th, Tulsa Ok

    okay guys there is a meet going on but i'm not hosting it, i'm just posting this for the host if any of you guys wanna come feel free to. this is his info: "Hey everyone, my name is Chase and im hosting a Mini Supra meet sat. april 11th. All Supra, Lexus, Toyota, or any other make are welcome...
  11. 86_sports_1jz

    Fuel Dampener Bypass

    how much power can the stock lines support?
  12. 86_sports_1jz

    Breather on IAC? (should it be routed to intake pipe insead?)

    i couldn't fit a breather on mine either and i didn't feel like bending anything so i just clamped a piece of wired screen, a pantihose, another piece of wired screen and another pantihose over it. just by layering all that stuff over the valve it seems to be working like a filter and i've had...
  13. 86_sports_1jz

    Arkansas Members

    how much are you looking for the blocks and trannies? i know you said one of your blocks has lost compression but are the others still good or do they need a rebuild? same with the trans
  14. 86_sports_1jz

    Running lean (12.5:1) above 5500rpms

    really i never knew that, how does the surge tank help prevent the walbro from dying?
  15. 86_sports_1jz

    I need an ISC block off plate fabricated, who can do it?

    doesn't any of the vendors make one? i could've swore i saw one somewhere
  16. 86_sports_1jz

    Running lean (12.5:1) above 5500rpms

    your walbro could be bad, you should check to make sure it isn't
  17. 86_sports_1jz

    Help! USDM 550 inj. swap

    when i had my wastegate vaccum lines routed wrong my car would boost creep like crazy over 20 psi then when i had the vaccum lines routed right it went away and acted normal.
  18. 86_sports_1jz

    OEM Wiring Work

    thats awesome! this will really help us guys who's harness is getting really old
  19. 86_sports_1jz

    1jz goin lean at 6k

    is the fuel pump still good? you should double check to make sure the wideband is calibrated correctly