Search results

Well i just checked the continuity of the NSS and its done for but still wouldn't it start with out it plugged because my friend has it disconnected in his MKII and it starts just fine

are you saying to just try and hot wire the starter to see if it works

would the fact that i cant bleed the clutch have to do with any of this

dont know but thought it would help. im desprate right now ive been so patient to get this car running i take my time as to not rush and screw things up. i know its been a while but this is driving me insane as to why it wont do anthing

Ive looked all over SM for people with same problem. Most of them where grounding issues. I checked and double checked all the grounds and the starter which all are hooked up, but still when i turn the key to start nothing happens. The battery is bran new and its driving me insaine. Some one...

well i grounded the coil packs and it did nothing

well i sisnt know that there wsas ground wire on the coil packs would this keep my car from starting

head ground

Here are some pics of all the ground wires that I know of. Im not sure if some of them are in the right spot.Ii know where the head ground goes but the others Im not too sure about.

Well I tried to do the security thing and I checked all the grounds (block, both the the transmisson, ecu ground and the head to the body). If there are any im missing then that could be it. The starter has the power wire hooked up and the female conector that plugs into it are all hooked up but...

well on my car its not being used so i dont think you need to worry about it

i was typing to fast when i put up the title lol but i figured that it was a 24mm because the 22mm i had was just a tad bit too small so i picked one up earlier and made shure it 1/2 drive because i figured it would be hard to get off

that is one sick car. i hope to reach those number with my other motor im going to start building soon after im all settled in in the air force.

I just installed a used jdm motor and it wont even turn over. I have power to every thing but it just wont turn over. I checked to see if all the ground wires were attached which i think they are and the starter is hooked up. I know that if the starter was bad it still would make a clicking...

thanks a lot for the info

thank you for the info but now i need to figure out where these wires go. they come out of the wiring harness from the same area that the female starter wire comes from. they are 2 brown wires and 2 white with a black stripe

well i was looking at the wiring diagram on TSRM and there was a wire going to the starter from the battery but there also was a wire that i thought connected to the starter that came off the wiring harness. I know that there was a plug that goes to the starter that i have pluged in. so im...

it comes of some wires leading from the battery ground

i havent a clue where this goes any info would be helpful thanks drew

just need to know the size so i may purchase the socket to beable to remove it so i can put the gear oil in i just bought