just need to know the size so i may purchase the socket to beable to remove it so i can put the gear oil in i just bought
R154 drain pug
- Thread starter drewsh666
- Start date
I *think* it was a 22mm, I can verify today tho as we're going to be filling up another R at the shop in a few. I'll be back!
-Mike
-Mike
it is a 24 mm hex on the plug. I recommend a 6 pt socket for this as a 12 pt normally will just slip.
+1 for 24mm. I also reccomend getting a breaker bar if you don't already have one. I replaced my tranny oil within the last year. and I gave myself a headache trying to loosen it with a regular socket wrench.
Just got back. 24mm (I know I'm late) .. don't use a socket.. use a nice tight wrench as It's usually very tight from my experience and will slip.
^ I agree.
space is tight and a tight fitting wrench works 10x better. if the wrench fits tight there really is no chance of stripping it.
space is tight and a tight fitting wrench works 10x better. if the wrench fits tight there really is no chance of stripping it.
Omfg lol. Just noticed that.
And my god pugs are ugly dogs. They always look like the got hit in the nose with a frying pan when born.
And my god pugs are ugly dogs. They always look like the got hit in the nose with a frying pan when born.
i was typing to fast when i put up the title lol but i figured that it was a 24mm because the 22mm i had was just a tad bit too small so i picked one up earlier and made shure it 1/2 drive because i figured it would be hard to get off
hvyman;1517735 said:
Up yours!
OP, I agree with the others, wrench or a 6 point socket... absolutely no 12 point sockets!