Car has been running with 660cc injectors for a while now. It idles fine and makes about 550rwhp currently at 18psi. I'm changing injectors because I don't think my 660cc are equip to handle a Billet 6765. So my question is:
What settings in AEM do I need to change?
Will my current map be...
I can't stop laughing
Look at this video:
http://www.youtube.com/watch?v=hMtZfW2z9dw
It get's stupid at 1:16, pay no attention to that
Now look at the Original:
http://www.youtube.com/watch?v=ua-OqYZC1DA&annotation_id=annotation_576468&feature=iv
I hope this is not a repost
History: in 2003 I had an aermotive A1000 mounted above my Diff, over the years gravity and sediments in the fuel tank finally killed it. I also did not have a pre-filter, I only had a post 100-micron filter.
Now I have a pre 10 micron and a post micron filter, here are the pics. The...
Here's most of my favorites:
http://www.youtube.com/watch?v=Jel2DJ-WdF4
http://www.youtube.com/watch?v=coP-Fhn2EIs
http://www.youtube.com/watch?v=Lzyyp61RPlw
http://www.youtube.com/watch?v=90EiLwtnwyI
http://www.youtube.com/watch?v=W6JPPZTmyHg...
UPDATE on post #37
I'm sorry if this was asked but it's bothering the crap out of me.
I have the jim king BBK and it's almost exactly the same as the ARZ kit, the only difference is believe is the fact that my rotor is 13" 1.25, his kit is 13" 1.35.
Now my question to is, how come with...
When I drove my car back in April it ran fine, boosted to like 1.56 bar. Everything was good. Car has been sitting for a while, I pulled (pushed her out the garage) her out and cleaned her up and stuff. Well I was playing music and it killed my battery. I charge the battery and started the...
Well, I went to the dyno the car today with a bunch of other MKIV owners. I could not get a torque rating as the RPM on the dyno was not working, not sure why. Also, I could not run any high boost due to the fact that my boost was falling off from 25psi to like 21psi. My W/G spring is to...
I'm trying to figure out a way to run my DB9 serial cable from my AEM EMS to my custom glove box plate but not sure how to connect my gender changer to the plate. I was thinking of drilling two tiny little pilot holes on the plate and screwing it in, but I don't know how it will look? How...
Dyno session is set up for September 14th on Sunday at "Speed World" on Sunrise HWY. Time is around 10am - 5pm. Come if you can. Not sure on the 3 pulls pricing but it should be reasonable. The more cars that show the cheaper it will be for all of us. Thanks
For sometime now I've been slowly losing interest in my car, it's been sitting in the garage almost all summer (due to hot weather and not having AC). For the first time in a long time I took her out for a drive to get a wheel alignment. She felt great but I can't boost due to not having her...
Just purchased an Insignia NS-R5101 w/ HDMI Receiver. I want to know how to get optimal settings with my current setup:
PS3 BD audio set to "Liner PCM" (HDMI)
TV set to Liner PCM
HDMI from PS3 to RCVR HDMI "IN", and RCVR HDMI "OUT" to TV HDMI "IN"
Optical cable from RCVR to TV
RCVR only seems...
Updated pics on page 3
Before Drag Racing:
After Drag Racing:
What do you think got bent? I can't see crap under the car. And I was gonna drive it around too :(
Just got the car back from the shop, car runs great and idle's beautiful. It started on the first key. I used a GM map sensor as I don't plan on boosting anymore than 28psi, I also used a GM temp sensor.
The car had lots of boost leaks, the worst ones were the tear in the inner cooler, the...
EDIT: Changed Thread Topic
I got this from SF as I know a lot of you guys don't go there much
To get a better quality video and better sounding, just add the following at the ending of the URL: "&fmt=18"
Try it out with this vid: http://www.youtube.com/watch?v=-7MMPe-kW3w...
I bit the Stand Alone bug
My AEM EMS:
And why not utilize my new engine harness
My VPC/AFC combo will be for sale when this gets installed
Thanks CKanderson
Well, today I was trying to tune my car with my VPC/AFC combo and it was not responsive at all. It would run rich (around "10") between 4k-5k rpms, then lean out at a bit below "12" then run rich (around "10") again between 6k-7k rpms. We messed with the rpms points on the AFC, we didn't know...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.