Search results

hi i have an stock auto tranny(aisto) with a 2jzgte, and i get for free a modify 2jzge torque converter, will be fit to the 2jzgte flexplate and tranny? thanks and regards.

Hi, To day i try to turn on the engine, but i found that the ecu don't get voltage in the terminal B+, I already check the EFI fuse and its good, 12V, any Idea where i can try to find the problem? i have the TS manual and electrical diagrams thank you for your time and full support...

Hi We want to share with all of you a full modification for a supra MKIII with 7MGTE engine the car came with out the motor installed, so we need to finish the engine ensambly and perform a lot of performance mods Front Face intake Manifold with Front Mount intercooler Maftpro system...

Hi, few days i ago, I install a IS300 Coil Packs in my 7mGTE, and the engine only crank, the ecu tro code 14, so I change to the stock 7M coil pack and run good, https://www.facebook.com/media/set/?set=a.712379118774386.1073741856.574435892568710&type=3...

Hi I search some info but without any good luck :1zhelp:. So I hope you can share some info and experience, of which piggy bag is better for install, setup and tuning. Thank you for your time and support :biglaugh:

Hi supra fan’s. I want to share with all of you my new project for my MKIII ’91 auto supra. Because the lack of near by Performance Shop and reliable technicians, I begin my performance shop PTR, I’m only work in week ends so it’s Slowly but surely. Let’s begin My supra MKIII Auto...

Hi I’ll change the dif of my supra, but I don’t know if I need to remove the rear axle hubs to remove the dif? Because in the TSRM only describe to unbolt all screws, but today morning I check it, and I don’t know how to remove the rear drive shaft to remove the dif :aigo: tks and...

I'll change the exahust system of my supra to 3.5", wich 3.5" performance mufller do you recommend? tks and regards.

Hi guys, I want to upgrade the exhaust system from 3” to 4” of my MKIII supra, do will get some benefit? by the way, if think that will be a good upgrade, wich mouffler will be the best option for the 4" tks and regards. Engine info 7MGTE Turbo garret G35R Auto tranny Lex with 550...

Where i can sent the torque converter to modify it near of san diego or yuma? Tks

Sorry for the dump questions, but I’m new for the automatic transmission :aigo: My best time at the 1/8 track, its 9sec, with stock engine and turbo, 18” street tires at 12 psi with lex mod, but I want to improve the time, so I have some questions. 1.- How High performance torque...

Hi, Few weeks ago, i went to the 1/8 tack to test my new 91 auto supra. The engine is stock. Only few mods. Walbro fuel pump Big Intercooler Water injection set at 5psi 3" exahust no cats 550cc injectors Apexi SAFMII to adjust the fuel NOS (but with some leack so I dont used...

Hi, I have install the Maftpro with SD set up, so no AFM , But if I change the stock boost to 13psi, then car begin to stall, if I change to the stock boost 7 to 9 psi, the car have no problem. What can I do to increase the boost to 14psi? Tks in advace. Regards. Carlos...

Hi, I install the Maft Pro with version 5.22 in to my 91 Supra, ( By the way, how can I make teh HAC mod to the ecu? ) But have few issues that I want to be fix before tune under boost. The main Idea is to keep the stock ECU working in close Loop, so I need adjust the Mafpro...

Hi, Yesterday I go to peroform the smog test to my new 91 supra, and the car pass it . But today morning, the car donsen't work, Check engine codes but is clear of any truoble. So then i check from some wiring conection, coil pack, resitors etc, and are fine, then try to star the engine...

Hi, Can I use a transmission oil cooler instead to use the cooling line the radiator for the auto transmission? The reason is because I want to install a Koyo radiator but that one doesn’t have the internal piping transmission cooling. So what do you suggest? Thanks and regards.

After a full engine rebuild, the car don’t run well. I’m still working to find the root cause with out luck, so I need some new ideas and suggest to find the Fproblem. Before the engine rebuild, everything work fine. Full Engine rebuild: 7MGTE Stock ECU running with MaftPro with 3 Bar Map...

Hi All, I have problem with my car after a BHG repair, when the engine is running the AFR is lean, the voltage in Vf1 is always 0.01, If I turn off the engine few seconds and then turn on the engine some times the VF1 voltage change to 1.90~2.0, the AFR change to 13.9 ~ 15.1, but after some...

When start the engine, run normally, but the VF voltage always is 0.0V, If I drive the car, feels like lack of power, the VF voltage is 0.0, doesn’t change during driving, What can I do? Sorry for the grammar :aigo:. ECU don't have any trouble code. The TPS voltages are fine. The...

Yesterday, I modify the downpipe to fix some exhaust leak, but when a friend lift the cart, hit the Aem O2 sensor, so I turn on the ignition switch to sow if is working, so the AEM gauge display turn on and display 14.8, so I think the unit is working, tomorrow I will change the O2 because I...