Search results

Looking for a complete running 89+ 7M-GE or 7M-GTE with grey plug harness and auto ECU. BHG is fine as long as it wasn't run long and no coolant sat in the oil. PM or email me at sandpaper86@gmail.com Thanks, Collin

Some of you may have followed my previous build with my 2JZ-GTE swapped '91 Turbo Targa. I had to pull the engine back out to make some repairs, and I decided to part it out and do something different. Round 2: Got myself an 86.5 NA hardtop sport package, less weight, stiffer chassis, and a...

I need to repaint my engine bay. I've bought myself a bunch of semi-flat black rustoleum at a great price, and I'm getting ready to paint it. Before I do it, though, I was hoping that I could get a few pictures of black engine bays to make sure that I won't regret it. Attached is my...

The black goo on the bottom of my MAP sensor that used to be pretty solid is melting away! I don't think it's been in contact with any harsh chemicals or any more heat than usual. Has anybody seen this, is it bad, and is there something I can do to stop it? I can see the circuit board under...

Current setup (Updated Nov. 25th, 2008): Engine/Drivetrain: -Aristo 2JZ-GTE -USDM TTC twin-turbos -R154 transmission -OEM Aisin clutch (I got it cheap. :)) -1pc lightweight driveshaft -Driftmotion 12x24x3 FMIC -Custom IC piping, 2.5" from turbos to IC, 3" from IC to TB -HKS Gen. 2 SSQV -Custom...

I'm looking for pics of aftermarket or modified fog lights in both pre-89 and 89+ bumpers. My stock foglight lenses are chipped and look like crap and I'm exploring other options before buying new ones. I've seen a few tasteful aftermark options, but I'm looking for more examples. Thanks, Collin

Current setup (Updated Sep 8th, 2008): Engine/Drivetrain: -Aristo 2JZ-GTE -USDM TTC twin-turbos -R154 transmission -OEM Aisin clutch (I got it cheap, and it's holding fine. :)) -Jawsgear 1pc lightweight driveshaft -Driftmotion 12x24x3 FMIC -Custom IC piping, 2.5" from turbos to IC, 3" from IC...

*** This setup is not for sale! I'm just looking for oppinions! *** I'm thinking about going back to stock twins as my goals for this car have changed, and I'm wondering if anybody would be interested in my single setup. Specs: -T04R turbo, 4" inlet, 2.5" outlet, 3" vband exhaust...

Option 1: Front 17x9 with a +24mm offset Rear 17x10 with a +20mm offset Option 2: Front 17x9 with a +24mm offset Rear 17x10.5 with a +20mm offset With the right wheels spacers (10mm?) they will fit nicely. My only concern is that 10.5 on the 2nd set may be too wide. The 2nd...

I'm having problems with underhood temps going high enough that my new wiring harness is melting! It was suggested to me that I wrap the exhaust manifold and downpipe with a DEI exhaust wrap, and I was planning on it until a buddy of mine said that keeping all that heat in would cause my...

I've been playing with Supras for some time now, and as we all seem to, I have collected quite the stockpile of parts. My 88 N/A is in need of a rebuild thanks to a slightly loose bottom end and bad rings (Both I attribute to sitting for 3 years with a BHG and moisture in the oil before I bought...

How much power can the stock fuel pump support? I have a 91 turbo with a Aristo 2JZ with a T04R turbo that will be on the road soon. Until the funds are available, it's going to be running the stock 440cc injectors and low boost (10psi) This really shouldn't much exceed 350whp. Can I get away...

Ok guys, this is build-up thread round 2! I started one on SF (SF thread) back in August of last year when I began this project, but it got sloppy and I kept changing my mind. Then when I went back to school in January, I had to put the things on hold, but as of last week, I'm back to work on it...

My mods will be: -Aristo 2JZ-GTE w/ JDM MAP ECU -T04R turbo, 63mm compressor w/ .81 A/R turbine housing -720cc injectors, AFPR, and dual walbros or external pump. We'll see when I get there. My goal is 550-600whp, which this turbo should be capable of at around 25-28psi, and I'm trying to...

So I have this HKS 50mm wastegate, and no instructions for how to set it up. It came with 1 nipple, but the wastegate has two ports- one on top and one on the side. Which one do I run the vac line to?! And what does the other one do? Should I have two fittings? Yes, I searched, but I...

damnit... wrong section... oops :)

This is my project that I have been working on since the beginning of August. It's taken me a little longer than I had planned, but I'm reaching the end of the under the hood portion and hope to have it driving soon. Mod list by completion: -Aristo 2JZ-GTE with MAP ECU and 7M oil pressure...