Search results

So as you guys know, this wing is highly desirable and super rare. I didn't realize how rare they were until I attempted to find one. I have been in touch with Kaminari to see if they can reproduce this piece as there is a big market for it and they still sell most of the other a70 parts per...

I guess I never posted it...here it is-510whp and 466 tq at 20 lbs (7m powered) http://www.youtube.com/watch?v=0mmSu38ePHY&feature=youtube_gdata_player

Runs were done @ 20psi on a Dynojet dyno at Titan Motorsports in Orlando Florida. ---------- Post added at 11:13 PM ---------- Previous post was at 11:08 PM ---------- Mods as follows: Built motor-7m (9:1 Wiseco pistons, Eagle rods, arp equipment, 2mm headgastket,etc.) Headwork (3 angle valve...

Florida is doing things big...this was from a few months ago...check out the beginning :icon_bigg http://vimeo.com/17694157

Im back :) http://fatlace.com/garagelife/get-blown/ Dont worry, I will do a build thread...agian :)

Anyone know where i can pick one up? Sorry if its a repost... http://www.abchobby.com/productimg/car/a70supra/01.htm

I cant get past about 19 psi on my setup. I am running the MAF pro tuned at around 11.5 afrs at wide open throttle. I am running a GT4082 turbo, and all the supporting mods-but cant tune out fuel cut. I heard something about a hertz cut that you can program into the MAF pro (I am running v...

Just a few:

i am not about to read that 800 page thread to find this out-so does anyone know if the yellow wire on the MAF pro hooks up to anything? It doesnt in any of the wiring diagrams, but just want to make sure. Also does any one know the description of the resistor needed and its placement on the afm...

Ok, as alot of you guys know my car has been down for some upgrades for a while now(since late January of this year). My lazyness and procrastination has not helped to get it going again either-lol. I do have some good news though, this is the first time I have pulled the car down for upgrades...

What is the kind and length of the throttle cable you guys use for a short runner front facing intake with a q45 throttle body? Something tells me a Lokar 48 inch one, but i think it may be a little long......thanks!

Before you get mad, I have searched all over for this answer, but cannot find one. On my current oiling system setup, there are IN and OUT ports. These ports have to be hooked up so the IN goes to the OUT on the filter housing, and the OUT goes to the IN(see diagram) for the system to work and...

check it out-not quite a magazine article, but its a start! http://www.tunerzine.com/articles.php?id=174 By the way, pics are of old engine setup, wait till the new one is ready!

quick question for you guys-for my setup with a gt4082, FFI short runner intake with a Q45 throttle body, which size intercooler pipes options would you go with: 1. Hot side: 2.5 inch pipes, cold side 3 inch pipes. 2. Hot side: 3 inch pipes, cold side 3.5 inch pipes. My dilemma is that the...

hey whats up guys, im doing a hg job on my supra, as mine has slightly blown around the # 6 water passage. the car was running fine, but a block test told me that i had a bhg. the block is straight(as checked with a straight edge). i have the head off and im taking it to be checked for...

here they are-i thought i hada bhg for sure, but i guess maybe not? 1-175psi 2-170psi 3-167psi 4-170psi 5-167psi 6-173psi they all seem good, the test was done with no spark plugs in and throttle @ 100% what do you guys think, the #s seem like a normal healthy engine right?

here we go runs were made @ 18 psi.

i guess i will start-i think it fits the car well.

hey whats up guys, this is for the people that dont check out sf all the time-i got some #s for you. i did some 15 psi pulls on a Mustang Dyno today, and ended up with 335.5 hp@ 5500 rpms, and 342.4 torque@4000 rpms. i did that on a 57 trim with a divorced downpipe, 3.5 inch exhaust, full fuel...

here we go, if this is in wrong section, mods feel free to move