Search results

https://www.youtube.com/watch?v=dkgGf_MjCqk please go to 3:13 seconds. Supra is def. riced out. airbags, foglights where the trims go and those retrofit headlights to replace the pop-up headlamps. I was wondering if there was a kit for these ironically. I've been looking at options for...

http://mk3ukr-supra.net/Brakes.htm I've read a few threads about people using the GTR R33 Brembo front brakes off of skylines for the MKIII's front brakes. I think this is great with the combination of evo rear brembo calipers you can now have a matching set of brembos for our mk3's for as much...

well recently I was driving over an overpass when my car decided to hiccup, sputter and shut the engine off where I had to roll back down the overpass to a side lane. My first thought was blown fuse, checked them fine, then ecu, opened it up, leaking caps. sent it away to DM got it back, still...

Figured it out with a test light. Just for future reference, ma70 is 4 plug connector and jza70 is 3 plug connection. ma70 is two red (power), two greens(ground) for the lightbulbs, 1 red by it's self for the outlet power and a white/black stripe for ground. jza70 is one red for outlet power...

http://www.supramania.com/forums/content.php?172-GUIDE-Fitting-an-Electronic-Boost-Controller-(EBC)-to-a-1JZ First off I have a turbosmart e-boost-1 controller. I also read the above link for a guide line. My first question is, I have an aftermarket BOV with my intercooler but would I still...

well I recently had the buckets out of my twin turbo R refurbished but I noticed the headrest for the driver(right hand seat) does not adjust, it has the notches but their not clicking in, is their an easy fix or should I of addressed this while they were apart. It's not the end of the world but...

well I got around to installing my 2jz 440cc injectors but I'm worried their n/a;s the 370cc I pulled out are yellow and have two small holes for jets and two big holes the 440cc I'm planning to install are green and only have two small holes. To me they should be the same if their for a...

I just finished installing my coilovers to the rear of my car, fairly straight forward 3 bolts on top 1 on the bottom. now for the front I was about to start when my uncle said it would be a waste of time to do in the driveway because I need a lift. something about the a subframe being...

my g/f posted this on my fb wall and I pretty much spit out what I was drinking, it was a pretty good way to describe me atleast.

Well I believe my problem may be in the previous owner, he told me he swapped in a new 1jz but I believe it may of got a new r154 as well. The shifter housing doesn't seem to be far enough back in the tunnel. When I put my short shifter in this was clear. my stock shifter did work but it's also...

I was swapping in my new short shifter and decided to get a whole new knob/boot to go with to replace the old leather. needless to say all the new ones are elastic and the original was wrapped in a thin leather around the metal bracket. Anyone have any creative ways of making it look oem? I was...

http://www.supraforums.com/forum/showthread.php?692474-Buying-my-first-supra

Recharge my A/C with a pooched heater core? My A/C went out last year and shortly after my heater core. I'm just wondering if it would be a waste to fill it back up for summer since it's only a summer cruiser or with the done heater core it will come out as fast as it goes in? Pretty sure the...

with that being said. I went into toyota to ask for a trd shiftknob to put on my beechperformance short throw shifter and the guy in toyota parts states they don';t list it by threadsize but application (ie: car). so does anyone know what stock toyota would have a thread size about 12mm x 1.75?

I tried to search for this but was spending hours going through things that had nothing to do with it. can you take a jdm 440cc injector from a 2jz and put it in a 1jz's fuel rail? or can you put the 2jz fuel rail and injectors on a 1jz? I was looking for a mild injector upgrade from the stock...

**UPDATED** - had to remove outdated images I found what I wanted; an authentic '91 twin turbo recaro edition! It was imported to Canadian soils the year prior, I became the second-owner. This was the car as of 2010: The hood fell victim to to sun fade, VIS Racing replaced it with a carbon...

Removed the original blow off valve, plugged the holes, new vac hose shortened up. Anything I missed or not looking right?

Figured I should put a couple pictures of my project up here and fill in the rest once it's complete. Currently just swapping an '88 motor out of a rustbucket into a '87 in decent shape just has a blown motor. But anyways heres the 1987 Supra Turbo, the bodies in pretty decent shape besides a...

I'm new to the forums but I'll probably become fairly active. But anyways a little about me: I've been looking around for a JDM car for quite some while when I found a USDM 87 supra 7mgte but the motor is blown. So I've been looking how to swap a 1jzgtte into it and learnt I'll need new...