Alright, I made the changes I needed to.
I also made the mounting hole 5mm diameter so it can be tapped for a M6-1.00 bolt (same bolt ford uses). If you want to mount the coil under the bracket all you need to do is drill this hole out to 1/4" and use a nut and bolt to secure it but, you will have to file down a little plastic on the coil it self.
I have one small issue that is making me second guess myself. I drew this with the coil centered in the bracket but now that I have an coil in hand I noticed the boot is offset. See the picture below, the 'X' shows roughly where the boot is.
This would mean the sparkplugs aren't centered in the head, and that just doesn't seem right to me.
I'd like Morganson to print that pic and make sure everything lines up with the one he made. (To ensure proper scale use regular 8-1/2"x11" paper and make sure you turn off "Fit to Paper" when you print).
If he can do that and everything lines up we can get this shit done!
I also made the mounting hole 5mm diameter so it can be tapped for a M6-1.00 bolt (same bolt ford uses). If you want to mount the coil under the bracket all you need to do is drill this hole out to 1/4" and use a nut and bolt to secure it but, you will have to file down a little plastic on the coil it self.
I have one small issue that is making me second guess myself. I drew this with the coil centered in the bracket but now that I have an coil in hand I noticed the boot is offset. See the picture below, the 'X' shows roughly where the boot is.
This would mean the sparkplugs aren't centered in the head, and that just doesn't seem right to me.
I'd like Morganson to print that pic and make sure everything lines up with the one he made. (To ensure proper scale use regular 8-1/2"x11" paper and make sure you turn off "Fit to Paper" when you print).
If he can do that and everything lines up we can get this shit done!