Search results

Can someone tell me the length from center pulley to center pivot of a 1JZ vs 2JZ serpentine belt tensioner? Thanks

Has anyone dealt with the R350 Toyota gearbox? Are they strong?

Hey all Just plastigage'd my mains and they were all almost exactly the same - 0.025" I am using 0.25 O/S bearings. Is this a bit too loose? I'm planning to make around 450-500hp Cheers Hunt

Hi all I used to have my 4424 Stinger on my 1G-GTE and only used the sensor off my CPS. On the 2JZ-GTE there is one on the crank and 2 on the intake cam. Which of these would I use when wiring up the stinger? The trigger on the crank and the sync sensor on one of the cam sensors? And...

Has anyone used these? http://www.power-division.com/product.php?productid=16305&cat=0&page=1 About 1/16th the price compared to Toyota - they're $355 for Toyota New Zealand!!!

Hey all I'm putting a 1.5J into my MK3 and one of the parts I am struggling to find one at a reasonable price. I have the Stinger 4424 ECU and my current 1G-GTE harness I mostly made myself. Just wondering if anyone has made one for the 2JZ and if the plugs are easy to come by? From what...

Hey all I have a crank that is apparently machined for 10 thou oversized mains and big ends. What diameter should the main and big end journals on the crank be if they were 10 thou oversized? I've had a search but cant work it out. Cheers Hunt

It appears you can use 3S rings for a 2JZ-GTE? Has anyone done this before?

Hi all I have a question about the order of the main bearing caps. The block I have currently has bearing caps with stamps on them as per the pic. The front one has a 1 stamped on the cast part of the cap. Then the next two have 2 and 3 stamped onto a machined part of the cap. Then the...

Hey all I'm rebuilding my MK3 diff, well, replacing the bearings and seals, and I've just ordered a solid pinion spacer from Weir Performance. My question is - how do you work out what shims to use? Surely you don't have to assemble everything to check clearances, only to find that you...

Hi Does anyone know what the Torque Bias Ratio for the MK3 Torsen is? Cheers Hunt

Hey all What oil/fluid can people recommend for a W55 gearbox? I've tried Redline lightweight shockproof in my (now dead) W57 and I had bad crunching issues with that. Cheers Hunt

After finally finishing (for now) my car after 3 years and getting a WOF and REGO for it, I've noticed the lights do some strange things. When I turn my headlights on high beam they sometimes shut off all together, including my spot lights, and then everything flicks back on again, including...

Hi all I just bought an old Lowrance Globalmap 1600, without thinking to check that it has a New Zealand map on it. Does anyone have any info on these devices on how to put a map on, and where to get maps from? I've had a look around the googles for ages, but because they're so old...

I'm about to change to some Wilwood 4 pots I've got a larger 1 1/16th Master cylinder I have a choice of 35mm (1.3778") or 44.5mm (1.7519") It's been suggested I should go for the larger caliper piston size - but I'd still really like to know what the standard single pot MK3 front...

Hey all Does anyone know what the MK3 brake pedal ratio is?

Hey all I'm after some 13" disks, slotted, for my MK3 (using Wilwood Superlite 4 pots). Can anyone suggest a disk to use? Does anyone have the specs of the standard 89+ front MA70 calipers? Mounting dimensions etc etc? Cheers Hunt

Went to the track last weekend - had a complete blast! Had good fun - didn't have camera first session then forgot to record the third session. My gearbox is buggered - synchro's are stuffed hence all the crunching, and the gearstick would often jam going from 4th to 5th. Here's the 2nd...

Hey all Are there any slotted rotors out there that are a direct replacement for our *A70 face-lift 297mm ones? Hunt

Hey all Is it possible to put bigger disks on, without doing anything else? Maybe just changing pads? Basically I'm asking, can you use the stock calipers (with adapters) on bigger rotors?