Search results

  1. sethron71

    Mechacnical Speedo Cable with Aristo A340?

    Hey guys getting really close on finishing up a swap I am working on. It is Aristo 2JZ-GTE w/ A340 into 88' MA70. I have everything wired up as per the million posts and diagrams. One thing I am not sure about is the Speedo Cable and then the buffered signal that is sent from the Dash to the...
  2. sethron71

    O-Ring cylinder head?

    Hey guys, Well I have never had much headgasket problems until the motor I am running now so I thought I would try something new. I am looking to o-ring the head. Actually machine a groove for a 1/16" o-ring around each bowl and around the water and oil jackets. I am not planning to do...
  3. sethron71

    Billet Alternator and AC Bracket Setup!

    Hey guys, Sharing some new stuff I am working on! Billet Alternator and AC Bracket Setup: So the setups benefits include: -Keeping AC with lower manifolds -Gets rid of the bulky steel stock alternator bracket -Gets rid of the steel AC tensioner -All lite weight billet parts...
  4. sethron71

    MK3 BBK Kit!!!

    Hey guys this thread is now a question and discussion thread for the "Sleeper Designs 13.5" MK3 Big Brake Kit (require 18" wheels)" Group Buy currently going on! Ok here are the final specs and pictures of the what is being offered: FIRST OFF THESE REQUIRE 18" OR BIGGER WHEELS TO CLEAR! Kit...
  5. sethron71

    Twin electric fan and shroud kit GROUP BUY FEELER

    Hey guys I am looking at producing a bolt on twin electric fan and shroud kit. Kit will just require very simple wiring to connect power to the thermostats! This is a group buy feeler and I will have pictures of the first one in the next 2 weeks but it will look very similar to the AA...
  6. sethron71

    7M meet Technology!

    Well since I am a die hard 7M man I am always looking for ways to better these beasts and here is my first step at some high tech head work: Let me know what you think and all your head gurus tell me what is best in modifying the cylinder head bowl. Basically all I a have done is...
  7. sethron71

    Compound 7M, first and only?

    Hey guys well I am almost finished with the compound turbo kit for my 7M. Should be the first and only compound turbo 7M and MK3 supra in the world! As you will see it looks very similar to the Boost logic kit basically because that is the only possible way to fit it all in there! It is a...
  8. sethron71

    Horsepower Calculation from Injector Duty?

    Curious if it is possible to do a rough HP estimate from your injector duty? For example(very rough numbers): 550cc injectors have a max of roughly 550rwhp at 100% duty cyle So can I say my duty cycle is at 62% at 12psi does that = 550x.62 or 341hp? Also I am at 62% at 12psi and 74% at...
  9. sethron71

    Different TPS's?

    Hey Guys looking for some information on the difference between TPS's. I have 2 different ones I have mounted to custom TB's and they were both different. Different rotation/mounting position between the two. The one I currently have has irratic readings on my S-AFC and it idles irratically...
  10. sethron71

    "ISP Mega Meet" Anyone going?

    Well it looks like I will be the only MK3 at this meet tomorrow, anyone else down to go up there? http://www.supraforums.com/forum/showthread.php?t=546673 I will be dynoing around 8 tomorrow night! Seth
  11. sethron71

    LSD Rebuild?

    Hey Guys, Read a few of the LSD rebuild threads and did some searching. Will this kit work? http://yotatech.com/f37/7-5-supra-lsd-rebuild-kits-177078/ I can do the work myself, so if this kit will not work where can I get a complete kit such as this? Thanks, Seth
  12. sethron71

    NE2K9 MKIII Dyno Videos

    Hey guys here are a couple videos of Manny's and Ulices Supra's dynoing at NE2K9 this past weekend: Manny's Beautiful Red Beast tuned by Chevy(Brian) did 450RWHP: Ulices 1J beast did 370ishrwhp I believe also tuned by Chevy(Brian): Hope you enjoy and sorry for the unedited...
  13. sethron71

    New Setup Finished and Installed, LOTS OF PICS!

    Well I just finished my new setup this last week. Then got in the car and went on a nice 800mile trip taking me to NE2K9 in NJ and then to Battle of the Imports in MD and then back home to Ric. Car had 2 glitches in my BOV was too tight and was hanging the throttle after hard boost, and I...
  14. sethron71

    Wideband to replace stock O2

    I am in the process of just running my AEM wideband's narrowband output to the ECU so as to only have to run one O2 sensor. I am curious what it takes to stop the ECU from throwing a code(21) I believe for the stock O2 not being plugged in? I researched it and came up with the information on...
  15. sethron71

    A little FFIM project!

    Well I have had the drawings and designs in the works for a long time and finally spent the money to have the parts machined to build a true fully custom long runner manifold. Features: -Manifold is fully custom from the head flange up -CNC cut head flange -1.75" mandrel bent runners...
  16. sethron71

    AEM Tru Boost problem with creep/overboosting...

    Hey guys, Running the AEM Tru Boost and I can't stop the creep. I have tried all the settings for spring pressure from 4 to 12 lbs. Still it creeps. The higher the spring pressure it makes it flutter and hold till about 4500rpm and then it creeps. Not just a little either. Setting A is...
  17. sethron71

    Gauge lights not working....

    Hey guys well got my car up and running. So far everything is running awesome still breaking in but was curious, my dash lights don't work. All the gauges work, all sensor lights work(bird cage, tail lights, door, check engine) Just no back lighting on the gauges. Gauges are stock never been...
  18. sethron71

    OBX AFPR Shit! Do not buy from OBX!

    FUCK OBX! :3d_frown: I was planning to use one of their aeromotive replica AFPR's #10908 which I figured how can they mess that up, a spring, bolt, and a diaphram! Wrong they did. The diaphram leaked like the Exon Valdez and was pumping 40psi fuel back through the vac line into the #5 and 6...
  19. sethron71

    S-afc II and FCD what order?

    Hey guys, Sorry I searched for an hour and know the Australian chick just posted a thread a bit back about the order to wire them in but I can't find it for the life of me! I am wiring my S-AFC II in tomorrow and the car already has a FCD wired in. What order do I wire them in...
  20. sethron71

    Interior Color - Grey or Dark Grey?

    Hey Guys real dumb question but is this consided medium grey or dark grey? I am ordering my lotek pillar pod and want to make sure it matchs! Sorry for the dumb question!:nono: Thanks, Seth