Search results

This hose: 12263 is 36$ at toyota dealer. but at that price, Is there any sort of aftermarket an-10 hose or something a bit prettier that I could get. I'm trying to put some bling into the engine bay I need to replace it because it is leaking quite badly. also on the PCV system, the...

notching the hood latch is the easiest way of fitting one and keeping the coolant overflow reservoir

Any vids of the beats pulling?

rewire with shielded wire, then see if there is still code 52 after resetting the ECU (pulling the fuse). like hvyman said: code52-->safe mode-->retarded timing+Rich condition

I have a terrible play in the wheel too, I have something like +- 45deg of rotation to stay in a straigh line... Any idea what I should check first?

I made one at school yesterday, you'll have to wait till the end of the day for a picture of it.

cx racing kit is bolt on to the stock IC, but very little mod is required for a aftermarket kit

pilot bearing could also be the culprit of the low rpm noise that go away when the clutch is depressed. or flywheel that is not torqued properly will make clunking noise too

yup. the red one

wow, clean car, nice job on the lightning!

+1, first rev of the mishi moto, on a early 89, no fitment issue, and plenty of space between the fan and the rad.

this is sexy!

flow test and see if it's worth it

don't want to start a new thread: with a safc II, lex maf and 550c, is it recommanded to put the stock maf housing back and tune with the safc from there? or stay with the lex maf housing and close the tuning screw all the way

Thank you! this is the last thing I needed to do with my money but it look so well on the mk3.

where do you find those clears and how much do they cost. this thread made me very interested

I though you could go up to 90% duty cycle MAX and 50% min 440Bhp or 440whp?

have you reset the ECU after installing a new MAF. I've seen it on a 7m with a bad maf, the owner put the new maf and the car would act the same (as if it was in failsafe), after pulling the efi fuse, he got rid of the 34 with the new maf only

does the CEL goes on?

this thread is full of win!