Search results

Have to take the plastics off. I dont really remember as i did it like a year ago to push a car i didnt have a key for. IS the wheel locked? OR just cylinder. Like i said you wont be able to turn the key unless you move the wheel.

Doesnt really seem negative. a smaller tire that grips more will do a better job than a wider shit tire. Up to you tho. Might be able to fit it if you add some spacer. Here is amar from sd. This is the most pull ive ever seen. Edit: He says hes going to fit some 13in wheels with the...

Nothing on the 7m is 3in. tb is 2.75 od and the turbo is 2in. If the by the intercooler you just get a reducer. You just have to figure things out. 3in has been done p0lenty of times. Who knows maybe the po just routed wierd.

Not breaking. Its cause the wheel locked. You turn the wheel(it only moves like 1/4-1/2in and its hard to move) and turn the key. IOF the key is worn wiggling helps. Cant just yank the wheel back and forth and expect it to unlock the key. It locks like that so you can break into the car and...

You have to turn the steering wheel a little to one way. It only moves so far so you have to turn it just a little bit before it hits the other lock.

nvm then.

^:rofl: Do you get 12v to the green/red wires to the tail lights? Do you get 12v at the yellow wire to the light failure sensor? You sure the light failure sensor you replaced it with is good?

There is a plug on the block for draining.

You get what you pay for... Maybe a link to the one in question would help a tad better also.

Welcome.

Replace the tps if its out of spec. Also not having a/c hooked up will throw a 51 as well. Also if there are no codes it will just constantly flash at the same pace. How quickly is it coming back on?

http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx Look around that site as well. It has the repair manual, parts catalog, and wiring diagrams.

Not everything is going to give you a light. Check your codes.

Dont need 2 threads on the same subject.

Call the reman company and get all the parts yourself and rebuild it?

Have you checked for codes? Is the grounds on the intake manifold tight? Ecu plugged in all the way?

Either pull or wide body. IDk tho man. dont think you can pull that far and your going to need paint even if you do. Will need paint with the widebody and you would need to get in on the s2 fenders or else its going to be really wide in the rear. WHy not just run a smaller tire? OR a...

You can buyu a intake kit from dm. Make an account to photo bucket and use the [img] code. or use tinypic.com

Post pics. Most guys only run 2.5in piping for your power level. Really no reason to run 3in.

With what turbo at what psi. Bov doesnt add hp.