Search results

View of back of house-the thing on the right is a water conditioning system I had installed (works wonders!)

View of the back yard

This is the living room setup-46 inch Samsung flat screen with an entertainment center that I made below)

Ok-updates for the house pics that I promised(I know they are a week late) The view of the front door:

I think the heart of my problems are from the tps sensor. X mans write up was great, although it did not work for me (I had to move around some of the wires to get mine to rev past 3k). My voltage is .396 for the tps-I read 0% at idle and 100% at wot. I had this same problem with timing about...

hmmm....can anyone running the q45 tps and throttle body chime in and let me know what they voltage they have thiers set to? Thanks for the input guys, always a help!

Thanks alot-no codes at the moment, but i think that my tps may be out of adjustment (using the q45 tps and throttle body). I cant get the timing to "jump around" like its supposed to before you jump the diag block. I had the cps set correct before installation-but I am going to pull it out...

just to add, i noticed that my timing was a little high (17 degree's) when I brought it back down to 10 degree's, it runs worse. It seems as if the I have a massive boost leak-but I dont. I did a boost leak test and I have a tiny leak at my methanol nozzle where it goes into the ic pipe. I...

whats up guys, maybe you can help me out with my MAFT-pro tuning problems. I wish I could give you guys a file to look at, but my laptop gave out on me. My problem is this-whenever I go WOT-the car is excessivly rich (like sub 10 afr's). I found a few boost leaks and fixed them-but its still...

Dan, hit me up on the phone and I will see if I can help you get the car running-sounds like an AFM problem or other electrical gremlin if you are using the stock computer. Zurud-honestly its to the point where I only drive the car about once a week because of the gas prices, and this car has...

is there anything planned for sunday? I have to work on Saturday and would love to meet up with some people on Sunday if there is anything going on.

Thanks, it is ready for Tampa next week-but I have to work. Too bad nothing is going on for Sunday.....Dan-what engine management are you running?

Thanks alot-hows yours comming along?

Thanks, I am going to check it out to see where the problem is. Thanks for the help!

The bad part is the when the tires are hott-it picks up the coatings (I prepped the surface correctly and everything-even waited 7 days before driving on it!) I think I am going to put some strips of diamondplate where the tires rest to solve that problem. The other problem is that the floor...

Finished product after a rustoleum epoxy garage floor kit and Sherwin Williams clearcoat(which is the greatest thing I have done-wipes up chemicals and oils with no mess at all!):

The garage when I first moved in and was putting in the garage opener and coating the garage floor:

The tool corner-I definatly need shelves!

Thanks, the rims are Volk GT-7's that I had powdercoated black and the lips in anodized blue (they were originally gunmetal and polished lips). I am thinking the mating surfaces are not flat on the manifold also-but I definatly dont want to take the mani off to have it fixed-i was thinking of...

Now onto pics of the house-only the garage area though for now. My girlfriend was gone for the past week due to SEMA in Vegas, so the inside needs a good cleaning due to me having a bachelor pad for a week-pics of the inside next week after its cleaned!