Search results

Interior-yes it needs some tidying....

Shot of the backseat area:

Another head on shot of the engine bay-needs to be cleaned I know......:nono:

Engine bay as it sits-a good piece of advice that I learned the hard way: do a boost leak test!! I thought I was all set because I used t bolt clamps along with good couplers and even a Nissan OEM q45 throttle body gasket-and I could not figure out why my AF's were in the 9.6's. I did the...

WOW-sorry about not adding anything to my build thread in a while, but it is crazy moving and getting settled in! The car is done for the most part, needs a few things taken care of-but it runs! The car needs to be tuned, wetsanded and buffed, and little kinks worked out in the engine...

Ya- i had the ARC front mount for our cars, its the same design as the sperco drop in, and I noticed no difference besides having a bar and plate design. Good unit though, but you can probably get something to outflow it for the price you will pay.

where can we get a turbo inlet purple thingy here?

quick question, was the 458 rwhp on 14lbs with the gt4082?

ya-you should definatly take up the slack on the bolts-i used some old lug nuts for mine also as spacers. When pulling the tranny (assuming a r154 5 spd)-make sure to remove the cluth fork (just pull straight out)and all the bolts holding the pressure plate on the clutch. it should separtate...

you were right-my dip switches were set for an internal wastegate-switched them up and it works great! Thanks for the assistance!

man, thanks alot-you are the man! I also have the profec b spec 1-I am going to check on the settings and how I have the wastegate setup and let you know-thanks so much!

hey, you may be correct-I had the unit working with the 57 trim ct 26 before (internal wastegate)-I wonder if the dip switches have to be different for an external setup....if you or anyone can get me a diagram of how the dip swithes and vacume hoses are setup on their car, I would really...

no luck on the wastegate issue above?

sorry about the pics bieng deleted i guess my attachement limit was reached and they were automatically deleted.

I took the car out for a spin yesterday but I noticed that it runs into the 20+ psi range of boost and then hits fuel cut. This is how I have the wastegate hooked up: One line goes from the boost controller (profec b)to the middle port on the wastegate, and another goes from the other boost...

WOW-i havent updated this thread in a while! Sorry, I just got internet access last week at the new house and man has moving been a pain! I drove the car to my new house and have it in the garage now. Pics to come as soon as I find my camera!

Ok-update time. I fixed the brake problem, the culprit was the master cylinder. I ordered one from www.mrautoparts.com and it was here in a couple days (~$72 shipped!) compared to ~$250 from the stealership. The unit was a genuine ASIN unit also, will all new parts-brake level sensor and all...

sorry about the lack of updates guys, I have been moving into my new house, and will not have internet service for another 3 weeks at least! The sixteen volt battery is jst for the extra juice, should not hurt anything in the car as the wires are at least 12 gauge. I fixed the reving part of...

Thanks for the input, but the 16v battery was dead at the time, so it was only putting out 14 volts (alternator running the car) so I dont think it was excess voltage. I am thinking its something to do with this stupid TPS.... The armrest is actually done in Orange Carbon-but it does look a...

Bump up-anyone have any input for the above problem?