Search results

  1. I

    Making the throttle react quicker...

    Is there slop in the linkage? If so ditch it and run a cable for the full length Jake.
  2. I

    Sent the crank to the shop now I got a question.

    Dirgle: Which ever way you jump make sure to plastigauge it when you're doing the assemby just to double check.
  3. I

    10 minute fuel filter change the easy way

    I posted about my concerns on the plastic filter way back at the start but figured why am I bothering and lost interest........ Some people need to learn by mistakes I guess.
  4. I

    What not to do in Drifting competition

    You'd think at least 1 person would have had the presence of mind to reach in and shut it off as they were lifting it off the clown!
  5. I

    What not to do in Drifting competition

    Yep not saying it's not his fault (idiot shouldn't have been within 200 meters of the road) just that if it were you or I we'd be held responsible by the law and get nailed for it! I'd have guessed the car speed a bit higher from the impact (man he splatters) As for Mr BMW what a fool and...
  6. I

    What not to do in Drifting competition

    Dead: The one where he hits the guy in white and he explodes arms coming off everywhere? If so I can sort of see what you mean but it's still the drivers fault (a court would see it that way)(sort of felt sick watching both these vids)
  7. I

    What not to do in Drifting competition

    It's a close tie between this vid and the Arab Drifter that kills the spectator which is the most stupid/horrific... :(
  8. I

    Headgasket change question

    LMAO I just had this horrible mental image of a kid reading it buying some to put on his pads and T Boning a bus full of Nuns at a stop sign !
  9. I

    Headgasket change question

    Ummmm errrr not wanting to be a smartarse or a knob about this but you DON'T put brake quiet on the friction surface of a brake pad...... It's sprayed on the backing plate of the pad and works by gluing to pad to the piston so when the piston retracts (square seal in the calliper pulls it...
  10. I

    Pirates try to attack cruise ship. LOL!

    Aaaaarrrrrr ;)
  11. I

    Pirates try to attack cruise ship. LOL!

    LMAO @ all the posts in this thread! :)
  12. I

    How happy am I

    I often wonder if these little cockgobblers realise how bad the beating is going to be if they're caught doing this shit :(.... I had some prick key the right rear 1/4 panel on mine during an interstate trip and would not have hesitated to hospitalise him if I'd caught him.
  13. I

    wont rev past 4000

    Or get a rebuild kit do the work yourself following the guide here then have it balanced Albert!
  14. I

    N/A-T oil return question !!!!

    Ahhhh with ya now Chucky! Good thinking to replace it if you have the pan off!
  15. I

    N/A-T oil return question !!!!

    Oilpump seal?
  16. I

    my th400 swap progress

    Will: Ya might want to do some more reading TH400's are electrical kickdown. ;)
  17. I

    really strange noise

    Charcoal Cannister can fart when there's a change in pressure in the tank, mine was doing it after sitting for 6 months as the temp in the workshop would change!
  18. I

    wont idle, popping, sputtering

    Blocked fuel line? ;) <jk> (sorry couldn't resist)
  19. I

    Official SF thread

    I recently got a new SF account but I keep it "read only" and if it wasn't for this I wouldn't have got my GrpA Pan :)!
  20. I

    Anyone running a two step kit?

    I run the Dis4's here but removed the 2step wiring as I had no use for it.
Top Bottom