Search results

  1. I

    maftpro is working

    You can set it's range but it can only make small adjustments! Guess it's a non issue now as the Gas system is totally gone from my car and it's now LPG only!
  2. I

    maftpro is working

    Agreed 100%! I was excited with the Wideband on my new Wolf till I worked out it's just a display and can't actually do anything to the tune based on the WB 02! :( It can do closed loop on the NB 02 but that only works in a narrow range at cruise!
  3. I

    lol who wants one?

    LMAO that's the problem with "in jokes" ;)
  4. I

    to replace head gasket or not

    And again if it does start leaking please DON'T add cold water to a hot engine as you'll anneal the head (soften it) this will make the head useless without spending a shitload of cash to reclaim it.
  5. I

    1jz powered MKIII does wheelie

    Of course a 1JZ will make heapsOtorque the 7M just makes it's torque much lower in the rev range where it's noticable in everyday driving. (it's leverage from the longer crank think of a breaker bar on a wrench) You can't/don't pull 6000+ in peak hour traffic.
  6. I

    lol who wants one?

    "Moran"? Moron maybe ;)
  7. I

    Break in....?

    Socc: If it's built correctly with good clearances yes after the first 2>300 you can start leaning on it! It's important to NOT stay at a constant speed during this time and avoid letting it idle too long. I also use a single weight oil to break it in as 5 qt's of single weight is 5 qt's...
  8. I

    You know you're a Supra owner when...

    LMAO I always say no as I like good coffee and I imagine Toyota Coffee is not the best ;)! SP 7M: LMAO ditto I crak up reading the posts in this thread! (if they don't apply directly to me they do to people I know)
  9. I

    Break in....?

    Lots of schools of thought on this subject. If you've replaced the clutch Boosting hard for the first 4>500 miles can be bad as it could slip and glaze the clutch. To break the motor in I first crank it till I see pressure with no ignition then fire it check for leaks then run it around...
  10. I

    Guy advice

    Lanky is making a Skin Suit ;)!
  11. I

    Boost problem SOLVED! Traction problem ensues!

    I have my fingers crossed for ya Jake! (now go and get that footage) ;)
  12. I

    Boost problem SOLVED! Traction problem ensues!

    If i ask for advice I carefully consider the answers before I act on it or disregard it. Part of the beauty of being online is so many different opinions/perspectives somewhere someone has had "the problem" and solved it! I'm constantly being educated here! Jake: Get that footage ASAP...
  13. I

    Boost problem SOLVED! Traction problem ensues!

    Can anyone hear something??? ;) <jk>
  14. I

    So...I caught my girl cleaning the house...NWS

    So the argument/fight/breakup was just a "Storm in a D cup" ;) (sorry couldn't help it)
  15. I

    to replace head gasket or not

    More or equally important is to get it hardness tested.
  16. I

    OIL PAN BAFFLES. Who/what/where?

    Not wanting to open that canOworms again (86mm Vs 91mm) With the right valvetrain the 7M should see 8000 easily. I have a brand new last production head here (casting number 16 from memory) And the dividers are much shorter and the ports are a bit ugly as cast! I figure with my GT3540R...
  17. I

    WHY is silicone couplers so expensive?

    Gonna get a shock if you need to buy any genuine Toyota hose's if you think $100 for 4 couplers is expensive Deez!
  18. I

    my other "beater"

    Is that a handicap rail on the back of the Rolla Lanky? ;)
  19. I

    Boost problem SOLVED! Traction problem ensues!

    Looking forward to it Jake! (get some footage on the street as well as the background gives a better impression of speed/acceleration! Track vids all look slow even when fast) What RPM is it going positive boost?
  20. I

    You know you're a Supra owner when...

    "I can tell you whether it's rod knock or not, I'm rather familiar with it." (taken from a GrimJack post ;) )
Top Bottom