Search results

  1. I

    Cressida VS Supra

    TJ: Not sure if it would still work the same as the ASICs stuff might not work under positive pressure! 10 hp is only a small adjustment of the boost controller away anyway ;)
  2. I

    Knock Knock..

    Does it change sound pushing the clutch in and out?
  3. I

    suprra_girl's rebuild ;)

    Get someone to make up a short 45 degree adaptor to go bewteen the Intake and the TB Suze.
  4. I

    gearbox planning ahead

    Steve: LOL not a chance that was 15 years and one severe brain injury ago! ;)
  5. I

    Flush Headlights complete sukkas

    Can you get a pic with them on a wall at night?
  6. I

    gearbox planning ahead

    I used to run a boat bilge pump for the cooler in the Datto engine with a Viton impeller that worked really well and is 24 hour rated sorry can't remember the brand though....
  7. I

    Cressida VS Supra

    That could be the 10 hp difference right there!
  8. I

    gearbox planning ahead

    I'd run it temp activated. You're going to have to run a lighter weight oil as there aren't many electric pumps that will cope with 90 weight ;). (Not to mention towing the tanker adds to the stress)
  9. I

    Cressida VS Supra

    Isn't the Cressida 7M's intake manifold different?
  10. I

    gearbox planning ahead

    Drilled and tapped fittings in the Drain and Fill plugs and a Pump would do it. Activation could be done a number of ways.
  11. I

    suprra_girl's rebuild ;)

    Cut a wedge out of the front of the intake to angle the TB down more.....
  12. I

    poly bushings feedback

    Hey Ronnie! Mine have around the 8K km's on em and are fine so far still nice and tight!
  13. I

    Tein SS, how are yours lasting?

    A good shop can handle it and all of the parts are available! :)
  14. I

    Tein SS, how are yours lasting?

    As usual when I'm going to upgrade/buy something I did a pile of research and contacted as many people I know in the industry applicable. What I could find out about Tein in general is a lot of the grey import used Coilovers coming in from Japan are 9 parts shagged but there's no way of...
  15. I

    why do people do big brake up grades to there car's

    With a decent BBK you can do either.....
  16. I

    Con rod/crank play (video)

    I thought you had the head off this one as well...... Didn't I read that in one of your other 100's of threads on this motor?
  17. I

    *7M Crank RPM Limit*

    Sounds much like my motor Kem!
  18. I

    Con rod/crank play (video)

    Ummm said it before and I'll say it again It's a USED motor you have no idea how it's been treated so it could be totally shagged no matter how low the miles are..... If it's suspect return it but I'm guessing since you've cracked it open you have no warranty...
  19. I

    Code 24 and won't fire - any suggestions?

    Grim: Well done on helping him out <golf clap>! ;) I hope you pointed him towards SM.
  20. I

    Do i need to have this thing to work properly?

    Sorry wasn't a joke cruel or otherwise...