Search results

  1. I

    Moroso dry sump oil pan

    I thought about it but the Cons outweighed the Pros for me and a Group A Magnesium pan came on the market so I grabbed that and a Teflon Crank Scraper instead.
  2. I

    Moroso dry sump oil pan

    Most Mk3 guys wouldn't spend the $$$ for a full dry sump system.
  3. I

    New turbo mock-up pics...

    LMAO at "SandyGina" ;) You're not man enough for a 55! <jk> Will that WindMill fit under the hood?
  4. I

    Fuel Pulsation Dampener

    Last time I ran Petrol I just Silver Brazed a new Banjo onto the stock Hardline and chucked the FPD in the bin.
  5. I

    15 psi wastegate spring, but i boosted to 22psi

    Go buy a packet of 100 then just use a sharp small screwdriver to flick em off and fit a new one each time ;)
  6. I

    New turbo mock-up pics...

    It's not a 55 ;)! <jk> Very nice Bryan!
  7. I

    happens to the best of us

    My guess is the chick was an instructor there. Can't see the track being responsible as everyone would have signed a waiver before entry.... you know the usual "MotorSport is dangerous you agree not to hold blah blah blah"
  8. I

    Dual Exhaust Setup?

    While the cutout will achieve the same there are a few downsides, slow spool while it's closed and the chance of a noise ticket if you give it a squirt at the wrong time/place. I'm NOT saying my way is the only way but it works for me.
  9. I

    Dual Exhaust Setup?

    Green line single 3" 97 db 337kw/450hp Black line 3.5" into twin 2.5" 88db 345kw/462hp!
  10. I

    15 psi wastegate spring, but i boosted to 22psi

    Set it so half the pin is showing in the hole then put the pin in and bolt it down! If you preload em too much they run out of travel and you can get a huge boost spike :(
  11. I

    2j fan update

    Check the engine mounts then check that the shaft in the water pump isn't trying to escape!
  12. I

    Ebay "HKS SSQV" disassembled (pictures).

    Yes it does ;)
  13. I

    15 psi wastegate spring, but i boosted to 22psi

    Is it a threaded rod adjuster?
  14. I

    Opinions on engine management choice...please

    I run mine to 7700 and 490 rwhp almost everytime I drive it and there's no way I'd try that on piggybacks.
  15. I

    Looking to buy a metal headgasket, need help.

    Another one with Mild to Medium Mods ;)
  16. I

    15 psi wastegate spring, but i boosted to 22psi

    Sounds like it! Should be half a hole preload at most.
  17. I

    maftpro is working

    Ditto!
  18. I

    maftpro is working

    Aaron: Yep I got some really bizarre Intake temps this build! It didn't really matter much as I'm not using the temp corrections just bugged me ;)
  19. I

    maftpro is working

    Agreed on the IAT Doc! I have one mounted there and see some mental hot temps on closed throttle, I've stopped using it and use the one pre TB now.
  20. I

    Ebay "HKS SSQV" disassembled (pictures).

    LOL yep just messin with ya ;)
Top Bottom