Search results

  1. I

    1jz Hp

    nanohorsepower Joe ;)
  2. I

    1jz Hp

    4 ;)
  3. I

    *7M Crank RPM Limit*

    The limiter is set to 7700 but it overshoots slightly to 7750.
  4. I

    *7M Crank RPM Limit*

    too slow there young fella ;)!
  5. I

    *7M Crank RPM Limit*

    LOL got ya! KMs= Kilometers
  6. I

    *7M Crank RPM Limit*

    Sorry don't really understand the question?
  7. I

    *7M Crank RPM Limit*

    9000kms/5555miles on it now! :)
  8. I

    Slow Spool & Chugging

    Clogged Cat?
  9. I

    HKS hg

    Thanks Mike! Great info as usual. Do they do a range of thicknesses?
  10. I

    Blah blah blah, 9/11 conspiracy, a plane has hit the Pentagon? What do you think?

    I've seen this topic on a few different forums and each time the discussion has turned to shit! This will be watched closely here so it doesn't get out of hand and cause division among the members!
  11. I

    *7M Crank RPM Limit*

    Steve: We'll see :)! Ash: The Non Squirter block would probably be an NA, was it drilled and tapped for the Turbo Drain?
  12. I

    oil cooler

    Yes. B&M 11.5x8.5 from memory with a B&M T Stat.
  13. I

    Found some treasure

    Tiss: Can't think of too many cars I'd replace my Mk3 with but that's one of em! Go Jet! :D Stupid money is always a good thing!
  14. I

    Insanely lame burnout!

    Also make sure no one touches the brake pedal while you're clamping the lines! ;)
  15. I

    Insanely lame burnout!

    Hells: Go to an autoparts store and buy 2 brake hose clamps and clamp off the rear flex hoses. Poor mans Line Lock! Just don't forget to remove em after the fun!
  16. I

    Found some treasure

    Always wanted an AllTrac! :)
  17. I

    What Exactly Causes The 7M I6 BHG's ?

    Our heads aren't terribly ridgid but if it's all built/tuned correctly I think it's a non issue Joel!
  18. I

    Removing "Glaze"

    The faster/slower Vertical movement will change the angle. You'll get a feel for it fairly quickly just don't spin the hone too fast and take your time. Also be careful on the downstroke so you don't pop it out the bottom and destroy the stones.
  19. I

    Removing "Glaze"

    The above info works the same for the flexhone 13! :)
  20. I

    What Exactly Causes The 7M I6 BHG's ?

    Joel: Yep that's the Detonation BHG but the more common one for Mk3's is the Firering at the end water passages and the side passages where it's unsupported!
Top Bottom