Search results

I just found the Knock Sensor Rewire thread. Is this the "Fix" to code 52 or do I possibly just have a bad sensor? I would hate to do all that work when I can just replace a sensor.

I found it; but, didn't read all of it. Have you tried a known good AFM? Did you spray carb cleaner in it?

Regarding MHG thickness: You get your machining work done and then figure out what thickness gasket you need. It will vary depending on how much material they have to remove. Just for reference, the stock HG is 1.37mm compressed. That's off of memory so someone correct me if I'm wrong...

I hope so because I have immediate access to another one. I'd like to at least know where they're located so I can replace it.

Ah. Last night I went through the EFI and Ignition Sections without any luck. I must have missed it...

Well, when I bought my second supra, it had purchase receipts and install receipts of an HKS Metal Head Gasket. I had no reason to believe otherwise. I turned up the boost and POP!!! BHG. I pulled the head and guess what?! Yep...no HKS Metal Head Gasket. It was OEM. Ok. Enough about...

Greyish blue would be oil. It could be bad turbo seal, bad valve stem seals, worn rings. How many miles on the engine? Does coolant come out of the overflow ever...does the overflow cap pop off while under boost?

What color smoke? Have the coolant tested for exhaust gases.

How's this going?

What a rip! I'm never selling my car!!! :D

Where in the TSRM is the Knock Sensor Information? Link? Anyone...??...Anyone...??...Beuller...??...Beuller...??... :biglaugh:

Code 51 can/will cause Code 52? Or do you mean that 51 will cause the hesitation? It seems to only happen in closed loop. After getting my TPS adjusted back into spec, 51 cleared itself. It never returned. I am not using Part Throttle Tracking. I am using AFR Tracking. Currently...

I just fixed my code 51 just the other day and now a code 52! When will the madness stop!?!?!?!?? ;) I'm not convinced I have a bad Knock Sensor. I have a suspicion that it's linked to my recent Speed Density Conversion. It's just a suspicion though... My check engine light came on...

What type of Bio-Diesel are you running and how much a gallon are you getting it for? I've been running mine on the low sulfur stuff and when I'm not out of it, I put in an additive.

Each end of the flex arm has threaded studs sticking out. One end of the flex arm is mounted to a bolt at the bottom of my sparco seat via a bracket that I cut out of 1/8" Aluminum Stock. The other end screws into a 360* Ball Mount that has been drilled and tapped accordingly. The Ball...

The mini 9 is great for tuning because of it's Solid State Hard Drive. Get one!!! :)

Thanks guys! It will actually pull in quite a bit closer to the driver's seat than what you see in the pic. Carter: I can take pics of the individual pieces for you. And how it's mounted. I don't have part numbers and such... Some of the parts were custom fab'd by me so I know...

Here's what I did today. I built and installed my laptop mount. It is on a Flex Arm that is bolted to the mounting rail under the passenger seat. When I don't want the laptop there, I simply remove it and bend the flex arm to lay flat on the floor. It's sturdy, completely adjustable, and...

Here's what I did today. I built and installed my laptop mount. It is on a Flex Arm that is bolted to the mounting rail under the passenger seat. When I don't want the laptop there, I simply remove it and bend the flex arm to lay flat on the floor. It's sturdy, completely adjustable, and...