Search results

Get the crank polished and replace the No.2 bearing, replace all the gaskets, and make sure everything is torque properly. As long as everything else was done properly before, this should be all that is needed. Jeff

What's wrong with liquid smoke? It's great stuff. Jeff

This was on Discovery HD a few months ago, I watched it again since I had only seen it on the non-HD channel before that. It's winnings. Jeff

It's a decent site, but doesn't always give you the information you need, and while more user friendly, I much prefer using the actual Toyota version. In any case, it's nice to have it all available online. :) Jeff

Some of this list isn't bad, but a lot of it is out of date and discontinued. The dealer will have the most up to date information. If they are incompetent or whatever, just talk with one of the people online. Sometimes things change with years, etc, so just a list isn't always the best way to...

If you use the 2JZ-GE manual 5-speed flywheel, you'll have to use the W58 transmission. If you want to use the R154 on a 2JZ, you need the 1JZ-GTE flywheel and clutch assembly (clutch is the same as the 7M-GTE). You cannot use a 2JZ-GE flywheel with an R154. Jeff

18 ft-lbs. Jeff

Or, maybe the wrong Dorman's were ordered, and deep-type ones should have been procured instead of shallow ones. Either way, I only use Toyota ones anyways, so whatever ;). Jeff

I disagree, you can remove all the bolts in sequence, pull the caps, pull the crank out. There's nothing wrong with this, and it is not unrecommended (is that a word) at all. Just keep things in the correct order. Disassemble the bottom end, check your clearances, etc. Don't be shy. If you find...

Not sure, but I bet the red one is still at Country Hills Toyota. Jeff

Voted for running and broken. It runs and drives, but needs a clutch, because under boost it slips. Jeff

The parts catalog for Japan has the part numbers for fenders and mirrors to do factory fender mirrors on the A70. Never seen one with it though. Jeff

It's pretty easy to navigate. Frames piss me off though. I'll check it out more later, haha. Jeff

They could have ordered it though. Jeff

There are 3 types of FPR on the Supra. 23280-42010 - 86.5-87 7M-GE and 7M-GTE 23280-42020 - 88 7M-GE and 88-92 7M-GTE 23280-42030 - 89-92 7M-GE 86.5-87 are the same N/A and Turbo 88 is the same N/A and Turbo 89-92 Turbo is the same as the 88 N/A and 88 Turbo one 89-92 N/A's have a different...

All MA70's have the same part number. Cressida's 7M-GE has a different part number. Jeff

I would do it right now if I didn't have to get it from Cali to Canada. :( EDIT: Also too many other cars, haha. Someone will take it off your hands I'm sure. Jeff

Yes, they're still available. Jeff

Ship it up here to Canada. I need a non-rusty specimen to put a 4A-GZE into. Jeff

Those aren't OEM blanks, just cheap aftermarket ones. OEM blanks are still available. I'm surprised the dealer can't do it, and that it was hard to find someone who would... That's whack. Jeff