Search results

OK guys I updated the diagrams to include the HAC sensor. I know the diagrams are a little messy but I hope it helps some of you guys out. Im just going with what is provided with the unit. :) I personally soldered my KS wire, and the orange and purple w/b wires. For the rest I used the...

Ok guys, here is a writeup for the MaftPro install w/speed density. instalation is easy and very similar to an safc install. What you need: 1.MAFT Pro base unit 2.AIT sensor 3.Map Sensor 4.Speed Density Harness(not pictured) Install instructions: Unplug the Ecu...

I am running speed density, no MAF. I will be posting a complete writeup with diagrams by tonight, possibly. I have mine in the glovebox temporarily until I find a good place for it. Ill keep you updated.

Lam you have the lights backwards. The high beam is supposed to be on the inside. Doh! :yelrotflm

Ok guys well I have a 100 miles on the motor now, and the maft pro is working perfectly. Last night I went ahead and setup the afr tracking, and its working great in conjunction with my plx m300 :bigthumb: It only took a few pulls under WOT to get my a/f's holding a steady 11.5 ish under...

Being underestimated is just part of being an mkiii owner.

If you have any questions on the install let me know. I can help you out too. :) Im loving my maftpro, engine runs like a dream.

lol. are you trying to hook up the "auto" function on your turbo timer? If yes than tap the IGT wire on the engine harness.

IGT will work.

that chart is nice too, but it refers to the color options by brochure name.

somebody already beat you to it Jeff: http://www1.odn.ne.jp/~aac76820/ click on the mk3 "supra" logo, then click on "color variations".

ok, I thought so. Are there an other pics besides that one floating around?

the gauge cluster uses 194's and 74's. the 194 is the same size used for our side markers. the key ring, ands the courtesy light on the lower steering column(if you have one) are also #74.

Anybody know who's car this is? Supposidly made over 900.

if you have a 89+ with the courtesy light on the lower steering column cover, you can tap into there.

Thanks for the help Shaeff. Here is an update from last night: - Timing is correct, all the timing marks line up perfect. cps is alighned perfectly. And I am happy to say Im a getting 10 degrees timing with the engine cranking, so I think its safe to say thats not the issue. - I am...

Thank you very much for the insight Satan. I will look into your suggestions. As far as relays go I might need a favor from you, but I will let you know. Thanks again.

bump

Ok guys I need some serious help here. Im over 2 years into a rebuild and for the past 2 months I’ve been troubleshooting with no success. I cannot get my motor to run or start at this point. I completed my rebuild about 4 months ago. At that time I was using an Safc2 and a Lex AFM(See my Mods...

yup. 45 degree, aluminum.