Search results

N/A 7M = Fail! :D Welcome to the club bro. Remember one vital thing, the Search button is your best friend and IJ is your worst when you don't use it. Adam

I just started working at Dominoes this week doing delivery and I must say, the money is damn good. In my first 4 days, I am pulling in about $14.70 an hour, about half of that is under the table. For just 27 hours of work I pulled in just under $400, $181 of that in tips (only about $30 of...

Dango, if you're upgrading wheels, go wider. Do a 245/40 up front and a 275/40 out back. As far as spacers go, I need to take my car to a wheel shop and see about getting my rear wheels tucked into the fender a 1/2 inch. Ok, time to update my build thread. I finished all my homework and...

Dude, quite doing it half assed and paint the trunk too. Adam

Ummm, no. Not unless I get a can of duplicolor spray paint to match the gay blue color. Besides, I'll be uglifying this car more once I finish installing my pile of parts. Atleast the black will match the mirrors. Adam

The dent came out, it just needed time to get put back in shape. I'll work on my car this weekend, once my homework is done of course. With any luck I'll have the fiber resin on both the upper bumper and lower bumper sanded down, and a 2nd coat of fiber resin in select spots applied on the...

Quick update, this is how my car is sitting. The fiber resin stuff is still drying, although very slowly due to the coldness here. I turne on the propane heater this afternoon for a few hours so that there would be heat in the garage for my parts to dry. Also, I finally started work again on...

Restore first, then modify. Once it's fully restored (mods are fine as long as they are done cleanly), people will really start to like your car as say things like "damn that Supra is clean" and "I wish that were my Supra." Look at former SM member mattjk's ultra clean 91 that he just sold...

When in the process of upgrading something you blow your nose and steel comes out (did that the other night after cutting my front bumper support). When you refuse to get rid of a door and fender that came off your Supra after it was in a wreck because you may need the steel for future...

Updates?

Decided to get rid of the nose cone emblem while I had easy access and teh materials easily at hand and ready. Got that off and filled in with Tiger's Hair too. Also cut panels to line the inside of the bumper support and prepped them for welding. Tomorrow or Sunday I'll make a couple...

I think I'll take some of the scrap metal from my old door and fender and reinforce the suport so that the hole is like it is, but enclosed on the 4 inner sides so that it has a sealed hole. I'll do some cutting and hopefully welding tomorrow. Adam

I gotta do it Chase in order to get the duct in there. Got the bumper hole cut and the duct trimmed, then molded the duct into the bumper using Fibre Hair. Once it cures, I'll put on another layer where there are shallow spots, then sand it until it is nice and smooth and paint the bumper with...

Cut the hole in the front bumper support and put on a fresh coat of black spray paint. Got it hanging from a come-along right now in the garage. The 3 supports in the hole took a few minutes to figure out the easiest and quickest way to remove them. And the air tank (100 gallon) ran out of...

Just secured a PLX M-300 wideband from Evolution. Should be shipping very soon. This is my list right now of parts I either have or have on the way that need to be installed. -Flushmount headlights -Battery Box (just need to drill the hole in the firewall and wire it up, the positive cable...

Took the front bumper and bumper support off, started cutting the bumper support but didn't get far before having to leave to meet a guy that's buying my wheels. Also cut off most of the extra tab on my PS radiator and replaced the bumpers on top of the fenders (stupid overspray).

Just take it to an upholstery shop or any taylor, they can sew a matching embodery where you cut so that the carpet won't fray and it will look factory. That's what I have to do with my hatch carpet (although I haven't done it yet). It'll probably cost you $10-15. Adam

I know Dr. Jonez has the Turbo-A duct in his bumper, I'm curious to see everyone else's pre-89's with their Turbo-A duct replica's. Post the pictures up people. Here's Dr. Jonez Supra. Also a good example of pics to post. Adam

Here's the pictures. Thers about 70 bundles of wires, and about 170 connections of wires that have to be soldered together (some wires have multiple wires that branch off). I'll be buying about 20 feet of heat shrink tubing some time this week.

OK, time to get more work done. I went back to the Vancouver FAP junk yard and stole most of the engine harness from the 91 turbo sunroof Supra they had there (the 89 Supra that I took the door and fender from also has a sunroof), the drivers side oh shit handle since mine is fucked, the...