Search results

OR... You need to do a resistor swap on the back of the tach. There are three or four resistors that need to be changed, because they have different values on the ge vs. the gte. http://www.4cefed.com/tech/natachchanges.jpg

Why did you post this thread twice? And yes, oil will come out the driveshaft end unless you block it up. And if you don´t have a driveshaft, why do you want to put oil in the tranny?

136 and accelerating in my 77 280z. 122 and chickened out in my 88Supra when it was na. Haven´t attempted anything beyond 110 in my turbo. I guess I really am getting old.

I like the wrinkle finish alot. What product is it, exactly?

Dunno if this helps, but I have the original MAFT, and started getting a stumbling, loss of power when adding throttle- situation, and it turned out to be a loose connector from the HAC line to the MAFT.

Supras require that you not cut corners on maintainence. Aside from that, they are very stable, comfortable and stylish cars. And with very little effort, can be made to perform as well or better than most comparable vehicles made today. Plus, you get the right to say you drive a Supra. : )

Your recliner is ugly as sin, and your plant is dead. Other than that, good work on the mold. :biglaugh:

I have that problem as well. When I start from a stop, I hear a loud- almost a tap sound, like someone lightly smacked a hammer against a thick piece of metal. I haven't investigated it much yet, but i imagine it has something to do with the brake pads/ shims moving slightly.

I've seen new heater cores go for less than $20 on Ebay.

LOL- If that's the biggest problem you have with your Supra....you're doing GOOD.

Is the compressor activating?

The true 'divorced' DP is made so that the wastegate pipe just opens to the atmosphere, and does not rejoin the exaust flow, as the one above. The result is a very loud 'woosh' when the wastegate opens on acceleration. I have a seperated DP as shown above and like it that way, but many people do...

Looks better than stock. : )

As for the squeal, I would guess the throttle body gasket. It is directional, and not symmetrical. Unbolt the TB ans check the gasket position.

I believe it's the 87-88 turbo model. The car only had 2 injectors each I believe, so you's have to get pretty lucky in that junkyard.

Mouser(kingbright) is the shizzle. : )

DA04-11PBWA/A http://www.mouser.com/ProductDetail/Kingbright/DA04-11PBWA-A/?qs=sGAEpiMZZMvkC18yXH9iIsLKQOrUJ3tGvhoO83cTHsE%3d

You ARE correct sir!

PS- The Advance auto price is $188 I think, they list it as a discontinued/ clearance item, so I'm not sure how much of a savings that is over the other parts stores. Its listed as Sealed Power brand, but the one I got from them was Actual Aisin with the word Toyota printed into the metal.

I was looking up prices on Rockauto.com, and just for giggles, I priced a new oil pump for the 7mgte. Part# 15100-42021 $103.79 ???!!! It's actually $15 cheaper than the non-turbo pump!!! What the Hey-Hey?? The listing says it's Aisin, too. I'm kicking myself, because I just 'thought'...