Search results

  1. I

    hks stopper head gasket vs reg hks

    I destroyed one :D
  2. I

    Wilwood caliper creaking sound?

    I'm talking about the Calliper Halve bolts that hold the 2 sides together NOT the mounting hardware....
  3. I

    Wilwood caliper creaking sound?

    Bzzzz nuh uh the Wilwoods are a 4 Piston calliper, no sliders, all the pins do is hold the Pads in. Check the Bolts are all tight you may have to contact Wilwood for the correct Tq setting.
  4. I

    The hp of the 7mgte

    Haven't been in the Big Shed much recently huh ;)
  5. I

    timing belt is rubbing timing case

    No more than 36ft/lbs on the bolt as well or you'll trash #1 cylinder as it's pulls out of round :( I crack the tensioner bolt loose put a 19mm socket on the crank and turn it enough to tighten the belt on the other side from the tensioner (leaving the spring to do it's job) then pull the...
  6. I

    timing belt is rubbing timing case

    As with everything there's a right and wrong way to do it ;)
  7. I

    timing belt is rubbing timing case

    Describe how you adjusted the tensioner
  8. I

    Valve Touched Piston When Crank Turned by Hand.. Insight?

    You have to remove a LOT of material before it becomes interference, what HG is in it?
  9. I

    Valve Touched Piston When Crank Turned by Hand.. Insight?

    Something is VERY wrong, shouldn't even come close to touching. Leakdown will show if it's bent or not as it will have massive leakage into the Intake or Exhaust "If" it touched it's bent, it takes almost nothing to bend a 7M valve.
  10. I

    any un-needed parts under there?

  11. I

    The hp of the 7mgte

    4.0L I-6 Falcon, 3.8L V-6 Holden and a 5.7L V-8 Holden/Chev and I still have the 6.0L Chev sitting here waiting for the next project.
  12. I

    The hp of the 7mgte

    Personally I wouldn't bother with a 7M, too old and too much involved in getting a good result.
  13. I

    any un-needed parts under there?

    The entire Engine is "unneeded"...... Dude do you seriously think Toyota or any other company put parts in that aren't needed for the correct operation of the car under all forseeable conditions? (add up how many Mk3's were made multiply that by a couple of $$ and you'll soon see if Toyota...
  14. I

    5 years of Supra ownership... How long have you been in the game?

    I fought and died in the War so I could buy a Supra :: IJ. ::
  15. I

    anyone seen the intake routed like this?

    Too many 90 degree bends over the hot part of the engine for me.
  16. I

    Going from Piggyback to Standalone

    When you start wearing big boy pants ;)
  17. I

    help lol

    While I agree with the sentiments the delivery is right on the "abusing other members" rule...... Think again if you're going to respond this way AJ, as for the OP wrong section and a few minutes using search would have gotten the result you needed, I don't usually tell people to search but...
  18. I

    can a koyo...

    Well there's a reason why the Fan ate the Rad..... They don't just explode for no reason, usually it's a broken mount.
  19. I

    can a koyo...

    Don't forget to check the engine mounts.
  20. I

    What in the?

    Smear of 3Bond 1207b on mine = no leaks ever. But you need to clean everything spotlessly with paint thinner.
Top Bottom