Search results

  1. lintlars

    Huge border fees

    gift is only valid up to 50$ value I get my stuff sent as a warrenty replacment or a demo item these usually gets by the duty charges
  2. lintlars

    Correct Flow Rate of PTE 550cc injectors

    yes PTE tests at 43.5 psi mine came back 50.2-50.7
  3. lintlars

    ***SM member 1/4 mi. times list***

    12.1@124 mph mk3 built 7m (je cometic) gt 35r rebic lc lexus AFM 680s injectors r154 feramic 6 puck clutch stock FW
  4. lintlars

    Thanks for the info on Venom injectors

    Ive also seen them stick open flooding the crankcase with fuel and also leak fuel externally all over a hot engine bad news all around
  5. lintlars

    Shop to test fuel injectors??

    Send them back to PTE they will give you a deal since its there injectors
  6. lintlars

    680cc with Lexus AFM to get 450hp?

    Import-Blowout-Sales I got both sets from this seller both fit the fuel rail and both tested good
  7. lintlars

    Cheap ring gap filer, bad idea?

    you are only supposed to file one side anyways and use the other side for squareness referance.
  8. lintlars

    680cc with Lexus AFM to get 450hp?

    I got two sets of ptes tested as well they came back perfect 550s and 680s also from ebay
  9. lintlars

    HPF feramic clutch disc

    Yes beware of the fullface feramic when using a AL FW I had one weld on me I am now using the 6 puck version with a stock FW great clutch and very streetable.
  10. lintlars

    MHG rivits need to be removed?

    put it on the block the rivets that hit the block should be removed
  11. lintlars

    rear end ride height off, something bent?

    Was the car ever in an accident? I had the same problem I found it to be my rear subframe was twisted and cracked where I could not see it from below I could put the subframe on the floor and it would rock about and 1"
  12. lintlars

    Rear strut tower bar?

    Ive got two left not sure if this is what you are after. http://www.supramania.com/forums/showthread.php?t=13215
  13. lintlars

    can you max out a stock FPR with a walbro 255

    I used the stock fpr for years on a 255 and had great afr's just make sure you drill out or bypass the j-tube as Sawbladz suggested
  14. lintlars

    JT2MA71's Build. Dyno video on post # 1191

    Wow you do some amazing work!
  15. lintlars

    Trany is stuck to motor???

    Did you remove the clutch fork? oop beat me to it no need to remove the pin just give it a hard pull.
  16. lintlars

    Will this Oxygen Sensor work?

    a screw in type for an 89 5.0 mustang works as well and you can find them anywhere just have to splice the plug on.
  17. lintlars

    Sound Performance Fuel Injectors

    I bought several sets from these guys I even had them flow tested they all came back as advertised. http://stores.ebay.com/Import-Blowout-Sales_PRECISION-T-E_W0QQcolZ4QQdirZ1QQfsubZ6QQftidZ2QQtZkm
  18. lintlars

    whats a good throttlebody

    Nash will you give up the part # for the lex TPS thats the same as the 7M? Ive yet to find this TPS all 1UZ TPS I have come across have a different end.