Search results

91 I took a pic of my center bracket and there is a hole in the middle where the clip goes that holds the wire for the horn but the bracket that came with the care doesn't line up with that hole at all lol. I thought about the same thing but that top bracket just won't line up with anything also...

I always try to follow up when I make question threads while I am installing stuff. I don't know how the hell I am going to secure the top of the intercooler but I'll figure something out with home depot brackets lol.

Took me 5 hours to install I had to hunt down an extra 90 degree coupler and my mind was fucked about the top bracket that it came with but figured out it was for a pre 89. I made a little bracket to help support the bottom gotta figure out a way to make a top bracket would be easier if Toyota...

I finally got it mounted I had to scrap the top mount I managed to use the bottom mount but I added another bracket for added support. Took it for a test drive and boost comes on hard, so far no problems. Turns out the intercooler was mounted on an 87, so I guess they changed some more things...

I tried that the vertical bracket only has bolts that go from front to back and the bracket that came with the intercooler goes left and right. Seems like it's for a pre-89, so far I have added a bracket for the bottom so now it's held on with 2 bolts instead of 1 and I need to figure out how to...

I got the stock intercooler out with a little fiddling I tried mounting the Spearco and I must have one of the brackets mounted incorrectly or something do you guys know where the top bracket mounts to on the chassis? I figure it's the middle bracket that holds the horns.

I have the Justspeed Ebay DDP and the fitment is not all that great it's a real bitch to tighten the bottom left nut next to the manifold there is no room to get a socket you barely have room to get a wrench and in order to get a good grip you have to get under the car with a stubby wrench. Also...

I appreciate the pics they help a lot I realize now I need to get another 90 degree coupler for the bottom inlet because the CX racing one just goes straight and the stock intercooler has a 90 degree pipe that comes out. Seems like I will have to take it to ACE hardware and get some bolts for it.

Yea it came with the brackets I forgot to post a picture in here for y'all I picked it up last night. My cat always inspects my parts, going to clean it before installing of course but my piping is from CX Racing so it is a little different than the one you found on google but shouldn't be...

ahhaha I won't be around Dallas anytime soon man. There is a performance shop just outside of my neighborhood that apparently sells couplers and T bolt clamps I am going to check them out in the morning. Thanks though.

I don't think it has the coffee can look to me the coffee can or fart can look is this what we have I would call a muffler. Tonight I picked up a real Spearco intercooler just need to get a short piece of pipe and a coupler with clamps to mount it. My cat always checks out my new parts. Going...

Sorry I figured when I said it's a real Spearco that would answer it lol it is same side and I do not think it's coming with hardware I bought it used and the owner had it on his old MK3 it's just the core itself I already have piping installed. Thanks IchibanEye

91, I can understand what works for y'all won't work for me but it can help give me an idea. I'll just figure it out when I get it tonight.

I am a visual person it helps me get a better understanding if I can see how it's setup it helps me with the fine details like how much room I have to work with, what length pipe, etc. It's a real Spearco intercooler from what I have read and can tell in the few pictures I've seen I will need a...

Have any pictures?

I am getting a Spearco intercooler tomorrow and would like some pics of them installed I tried looking them up and got pics of them mocked up on the car with no pipes connected and such. I read that it bolts right into the stock location and don't even need to remove the bumper I hope this is...

Scot, empty your inbox lol. I went to the ATM tonight and I noticed a metal jingling sound from the right side of my car as I was driving along in the neighborhood I heard the sound bouncing off of cars and mailboxes it sounded like it was coming from the rear. What the hell is with these metal...

I love my Tanabe Super Hyper Medallion, quite while cruising and sounds amazing when you get on it. I hate squeaks and rattles they drive me nuts, so far I have my windows rattling sometimes, hatch rattle even after I replaced the bump stops and weather stripping for it, and I think that's it.

My plan is to go for OEM bushings and such since that is what I am going for I want comfort more than anything but the ability to have fun on the track, which I am sure new OEM stuff can handle no problem I've seen car review videos of drivers thrashing the car in japanese mountain roads no...

Not to steal the thread but I figure why not post here since I think my problem is a bushing problem but at low speed like 1mph or something I hear a metal clinging sound from my left rear wheel area and on the way home from work today I had the windows down and took a back road into my...