Search results

Try this page http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=/mini-wedge.html For the 194's i used the "WLED Miniature Wedge Base bulbs" WLED-x5 For the 74 i used "Instrument Panel and Gauge LED Wedge Base bulbs" 74-xhp3 Hope that helps.

Other than the air intake, the coolant is the coldest thing in the engine bay, and its damn near 200*F. On a properly heated engine, there are not allot of places that are going to be comfortable to touch. With that said, there are some spots that the heat does need to be controlled (but youll...

Make a vacuum leak on your car and see if the vacuum reading changes. To the OP vacuum readings should be 18-20 depending on elevation.

Easily.

Check Cam timing. 11 inhg is way low.

I always wondered what thats for. Is it so the brake fluid wont splash onto the vent?

E-brake shoes dont need bed in. In normal circumstances they shouldnt slip at at any time. Install them. If you have enough adjustment to install the rotor, itll work. I am interested to see if it works.

Thanks, Madison area. WyoTech kicked ass, pricey though. Whats new and cool?

Was the master bench bled before install?

The worst thing that is going to happen, is at some point your not going to be able to get it in, or out of gear, leaving the car useless. So if your prepared to be stranded somewhere, drive on.

We need the rest of the readings. Is the vehicle run on a dyno during the test or simply reved to a higher RPM? Is timing checked durring the test? Did the technician have the car at operating temp before the test? (common mistake that "go fast" techs make, bringing me allot of work over the...

Left side. 24mm.

Thats terrible, to walk to your car safely parked in the garage and find this. Def looks fixable, but still sucks. At this point, consider yourself responsible for the repairs, not likely youll see any reimbursement, sucks yes, but reimbursement is only an unlikely bonus at this point. What...

When i left wisconsin a few years ago, to move to Sacramento for school. i knew nothing about cars and little about supras. Now i have finished WyoTech and spent a couple years in the field, and on my way back. Looking forward to meeting you all. Here is a little pic, we stopped in Reno...

For a 7m? http://store.driftmotion.com/static/i-heatshieldinggasket7m.php

Location http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=28 Looks like http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=29 Pin 12

Here you go. http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=23

Your battery is junk.

Right... Is the stinger compatible with the stock ignitor?

To verify that the ground path is the issue, test with the headlights on and off. Take a volt meter and put one lead on the battery negative terminal, the other at the engine block (likely need some extra long leads). The reading you are going to get is a difference in voltage between the...