Search results

Happy Birhday Abe, Any word back about your interview?

I didn't use a gasket. Just a nice bead of Ultra Black and let it cure for about 10 minutes before i put the pan on. No leaks on mine.

I did the GE with GTE electronics. I bought a turbo parts car for 600 bucks from a member and the car ran. If you can locate one at Pull-A-Part then just basiclly strip the block down to just a long block. Take the ECU and harness and start piecing together from there. As stated in the write up...

The way i set my tire pressure in the rear for drag racing is to go to a nice black top raod that will leave a nice mark and do a burn out. See where the darker marks are on the road and adjust accordingly. If it's darker on the inside adjust your camber so that your tires are flat against the...

True, for the price of the parts at my cost you could buy 8 hoses. Not to mention mor trouble than it's probably worth.

Yeah true, plus the unions are around 1.75 to 2 inches long so it would not line up right. What about a tubing 90deg ell with a union of the side closer to the block or cut the bend off the hard line and put a tubing 90 there also and make up the difference with some tubing?

Thanks Ian. Now you are going to have me going hunt down those clamps and change them all on my car. I know it may be expensive but waht about getting some AN type fittings and a piece of stainless steel tubing and bending it in to a 90deg. angle then tighten it all down. It's all metal to...

Question, My idle screw looks like some one chewed on it. Not sure if it is still in the specs it needs to be. Is there a way to readjust this screw back to factory specs for proper function or is the re calibration take care of all that?

7EMPIRE, I'm 6' 1" 320 lbs. i need some extra room for my hands...lol

welcome to supramania, you got some mad drift skillz yo!!! good vids!!

I have to agree also. This place is 100 times better than any other forum past or present. No matter how much you have invested in your car everyone treats you as an equal. I to would also like to thank all the members and mods of this site for having such a great please to get info and talk to...

I had mine burst also, got a 3/4 90 deg. hose from Advance Auto Parts. Took like 20 minutes to change including removing the distributor. Long ass needle nose pliers with a 90deg bend at the end worked wonderfully to take the old clamps of. Replaced with worm clamps this time. The back was...

welcome to SM.

stock filter location here.

When you have more tools in your trunk than in your tool box.

Yes there is a write up. It shows you how to install them in the factory holes in the cluster. Looks nice also. i have Sunpro Gauges and i think they look nice. Not to ricer.

You just have to take the cluster out. But as i have learned on here in the past few weeks, the stock gauge is not that reliable. Might be a good idea now since it's no longer working to put in a aftermarket temp gauge. You can get them at your local parts house fairly cheap. Just my .02

Recheck all the wiring you touched. Chances are something it touching somewhere or has come out of it's connector causing the short. Had the same problem afterI rewired my fuel pump circuit and a wire had come out the butt connector. Good luck.

It has been like this for 6 months now. The longest my car has run between tare downs. I wanted the extra piece of mind knowing they are tight. Northbaysupra, I did this with out looking for repercussions on here. Don't go to 95 thinking it is the right thing. I did this on MY car. I...

Ok cool =, well then yeah, they are at 95 ft lbs